Автоматическая цифровая шина Надувное

Automatic digitalTire Inflator E-07-OPS Main Feature: Water Proof Model is an Option Over Pressure Setting (OPS) Auto-Start Inflation 102PSI/7bar/700kPa Fully Automated, fully programmable, micro-processor controlled conversion system. Self-diagnostic features. Suit for: Motorcycle, Car, Light Truck * Technical Data Summary Dimensions(Height* Width* Depth) 290mm*230mm*120mm 11.4''*9.1''*4.7'' Net Weight 4kg/8.8lbs Gross Weight6.5kg/14.3lbs Packing Size(Height* Width* Depth)170mm*500mm*290mm 6.7''*19.7''*11.4'' Power Requirement 100-240Vac 50 / 60HZ Power Consumption 10VA Operating Temperature Range -20/-4°F to 70 / 158°F Max Inlet Air/Nitrogen Supply 116PSI / 8bar / 800kPa Operating Range 5-102PSI/0.3-7bar/35-700kPa Over Pressure Setting Range 0-29PSI/0-2.0bar/0-200kPa Accuracy ±1PSI/0.07bar/7kPa Resolution 1PSI/0.1bar/5kPa Units of Measurement PSI/bar/kPa Specifications: 1. Adjustable over pressure setting(OPS) 2. Auto-Start inflation 3. Automatic zero drift adjustment 4. Remain at last setting 5. Comprehensive diagnostics and error reporting 6. Audible and visual end of the cycle signal indicators 7. Large backlight LCD display 8. Vandal resistant mechanical switches 9. Suits Standard nitrogen bottle/Direct nitrogen supply from generator/Air compressor 10. 1 No.*10M/32.8ft standard hose with single clip-on open type chuck 11. 1400mm/55.1 grey mounting steel stand base Supplied separately Detail Description of OPS: Over Pressure Setting(OPS) When fitted,the bead of the new tyre must be seated on the wheel rim.This is done via inflating the tyre past the required pressure until the bead is in place.The pressure needs to then be reduced to the required pressure.Traditionally this is done manually and is therefore time consuming for the operator.The OPS function allows the operator to set the amount of over pressure between 0 and 2 bar/29psi/200kPa.The unit will then over inflate the tyre by the set amount before automatically deflating back to the final pressure required.