Автоматическая линия продольной резки металла / Металл разрезая Маха

This Automatic Metal Slitting Line consists of the hydraulic decoiler, flatting and cutting,pinch feeder, aligningguider, slittting system, slitted scrap recoiler, looping pit, strip recoiler, control board and the PLC system 1.Matching material: Low carbon steel ( HDGI, CR,HR), electric steel( silicon steel), stainless steel etc.2.Material thickness range: 0.3-12mm for carbon steel, 0.1- 5mm for silicon steel, 0.1-3mm for stainless steel3. Material width range: 500-1600mm maximum4. Coil inner diameter: 560mm - 610mm5. The slitting width tolerance: ±0.05mm in the thickness range between 0.5-1.0mm±0.1mm in the thickness range between 1.0-2.0mm±0.15mm in the thickness range between 2.0-3.0mm6.The slitting straight tol: 0.2mm/m7.Main motor power: 220kw8. Controlling system: PLC9. Total weight: about 60 TonsFor other parameters pls refer to the technicaldata as below, Machine Type Coil thicknessCoil widthCoil weightNO. of slittingLinear velocitySlitting speedFloor space (Length*width)RSHY100 0.25-1.0mm600-1000mm8tons10-2510-100mm80-100m/min.15 m*11 mRSHY200 0.5-2.0mm600-1250mm10 tons10-2510-80mm80-100m/min.18 m*11 mRSHY300A 0.5-3.0mm600-1250mm15 tons8-1510-80mm80-100m/min18 m*11 mRSHY300B 0.5-3.0mm600-1600mm15 tons8-1210-80mm80-100m/min21 m*11 mRSHY500 1.0-6.0mm600-1600mm30 tons3-1010-60mm60-80m/min21 m*11 mRSHY600 2.0-8.0mm900-1800mm30 tons3-610-40mm40-60m/min30 m*11 mRSHY600A 3.0-10.0mm900-2500mm30 tons2-510-30mm20-30m/min35 m*11 mRSHY600B 3.0-12.0mm900-2500mm30 tons2-510-20mm20-30m/min38 m*11 m