Авто Рама машины

Auto Frame MachineFL3-18 Technical Data: Working Platform Length: 5500 mm Working Platform Width: 2000 mm Working Platform Height: 300 -1020 mm Net Weight: 3200KG Hydraulic System MWP: 70 MPa Tower Hydraulic Cylinder Max. Lifting Force: 95 KN Tower Pulling Range: 360° Inlet Air Pressure: 0.8 MPa Max. Lifting Weight: 3000 KG Features: 1. The platform is Manganese plate. 2. Designed with the striation structure, no dead point in pulling with this platform and the tower can be moved and fixed at any point. 3. The hydraulic towers can be moved freely alongside the platform and turn 360° as operating. The hydraulic cylinders work vertically, resulting in maximum force and most powerful effectiveness. 4.High qualitychains and plate tools are used flexibly and conveniently with long life. The entire series of tools accessories enable to do any misshape correction work. 5. Hydraulic system with good design has powerful driving force, long life and low failure rate. 6. The mechanical measuring system more suitable for workers. 7. Major clamps fix the auto quickly, firmly and accurately. 8. Applying parallel-connect synchronous hydraulic cylinder with high synchronous precision; the integral mechanical lock is processed one-time. 9. Without synchronous errors; the sharing beam adopts high quality manganese plate and all the welding positions ensure the position of shafts and holes. 10. Special design for lifting forces; in order to improve the service life of the oil cylinder, increase the oil cylinder diameter is increased and double oil cylinder lift at the same time. Under 15Mpa-17Mpa pressures, it can meet the lifting requirements of 3000KG auto weight. 11. Removable cross-members.