Авто Потери-пеноблок формовочные машины (EPS Machiner

eps machinery characteristics: 1This machine applies PLC controller and touch screen control system to finish the autocycle process of opening-closing mould, feeding, heating, heat preservation, cooling, demoulding and releasing. 2This machine is welded from high quality square profile steel and steel plate, which is subjected to heat treatment to ensure the machine has no deformation,and has high durability after being assembled. 3This machine applies unique and advanced 7 shape,reversed 7 shape, and omnidirectional EPS heat penetration process,which improves the cementing and slaking uniformity of product,reduces steam consumption,and quickens the shaping speed.It resolves the heating temperature uniformity problem of large size Lost-Foam block. 4This machine applies high-efficient vacuum cooling system and large current air cooling device,which shorten the block cooling time and reduce the moisture content. Vacuum supported machine is high efficient for making high-density plate. 5Most of the main components are of world-famous brands,with reliable performance,stable quality,long service life and low maintenance cost. 6This machine applies hydraulic pressure transmission, hydraulic ingot stripping,which makes steady running and tight locking. 7High production efficiency.The production cycle of each plate is 4-8min.Automatic pneumatic charging shorten the production time. 8According to the parameter of EPS raw material,such as ingredient,beads diameter,specific gravity,and foaming activator,this machine applies expert control system,which realize self-adjustment to steam volume and heating temperature,improve the quality of product.The high automatization simplify the machine operation. This machine has radio communication port,which realize remote supervision to machine performance and product quality. ItemSPCB301206Mould Cavity Size3040*1240*630mmBlock Size3000*1200*600mmSteamEntryDN150Consumption30∼40kg/cyclePressure0.6∼0.8MPaCompressed AirEntryDN50Consumption1.2∼1.8m3/cyclePressure0.5∼0.8MPaVacuum Cooling WaterEntryDN40Consumption0.3∼0.5m3/cyclePressure0.35∼0.6MPaDrainageVaccum drainDN125Up&Down Steam VentDN150Air Cooling VentDN150Capacity @18kg/m38min/cycleConnected Power19kwOverall Dimension7200*4500*3000mmWeight7500kg