Авто батареи зажим

Auto Battery Clamp 1.For 12V-24V vehicle 2. AC/DC 3. Contacts material: Iron copper 4.Insulator material: PVC 5.Wire rated current: 130A 6. Wire length: 2200mm±50mm 5.Wire cross-sectional area ≥ 8.0m² 6.Wire length resistance : 1.83mΩ/m(20°C) 7. Voltage drop ≤1.1V Note: these datas are used the reference value of the soft copper wire conductor cross-sectional area Usage method1. First , one end red battery clamp connect with the red battery positive in the breakdown vehicle 2. Another end red battery clamp connect with the red battery positive in the rescue vehicle 3. One end black battery clamp connect with the black battery cathode in the breakdown vehicle 4. Another end black battery clamp connect with the black battery cathode in the rescue vehicle 5. Start the engine of rescue vehicle, then start the engine of breakdown vehicle. If that still does not start breakdown vehicle, check the metal contacts see if every part contact well. After starting the engine, remove the battery clamp in sequence, otherwise may cause short circuit. Remove line method 1. First,remove the black wire from the breakdown vehicle 2. Then remove the black wire from the rescue vehicle 3. Remove the red wire from the rescue vehicle 4.Finally,remove the red wire from the breakdown vehicle.