Анаэробные резьбовых клей (клей)

Anaerobic adhesives are primerless, fast curing with excellent gap-filling, chemical resistance and shock/vibration resistance. It's widely used in machine tools, pumps, compressors, presses, mounting bolts and gearboxes Anaerobic adhesives are perfect for threaded assemblies, curing in contact with metal in the absence of air. The threadlocker adhesive fills the entire air space between the threads, forcing out the air, so the threadlocker can bond to the metal and cure, creating a secure, unitized assembly that will not loosen. Also, the gap between the threads has been completely filled, thus sealing the assembly from moisture, and preventing rust and corrosion. Most threadlocking assemblies can be easilyremoved with standard hand tools, or by the application of heat. Cost savings are a major advantage of liquid threadlockers. With applications in Machine tools, presses, pumps, compressors, mounting bolts, gearboxes.Name DescriptioncolorHYBOND 222Low strength,thixotropy viscosity,for M2-M12 thread locking and sealing . Instrument can be demolished with ordinaryblueHYBOND 242A removable strength, general-purpose threadlocking adhesive especially well suited for fasteners between 6mm and 20mm in diameter. Cures reliably even on stainless steel.blueHYBOND 243Oil-resistant,medium strength, easy demolition, it can be a slight oily surface contamination on the use of job,M20 can be used in the following thread locking and sealingblueHYBOND 262Aplicable to most metal surface, thixotropy viscosity , good chemical resistance , M20 can be used in the following thread locking and sealing , High strengthredHYBOND 271Very high strength, medium viscosity threadlocking adhesive for products don't require disassembly, can be suited for fasteners up to 36mm in diameterredHYBOND 272High temperature, high strength, recommended for the following bolt diameter 36mm, required heating and disassemble instrumentredHYBOND 277Tolerant of oil and other contamination. High strength, high viscosity threadlocker for nuts, bolts, and screws up to 36mm in diameter. Prevents fasteners from loosening due to shock, heat or vibration. Protects threads from rust and corrosion.redHYBOND 290A medium strength low viscosity threadlocking liquid, wicking along the threads of pre-assembled fasteners between 2mm and 12mm in diameter to secure them in place. Penetrates threads by capillary action, simplifies preventive maintenance.green