Аньши Отключение Дважды сторона модуля

Features 3M: 1) Temperature: -5 - 40°C 2) Relative humidity: <85% (+30°C) 3) Atmospheric pressure: 70 106KPa 4) Material: stainless steel and cuprum, cuprum gold plating over nickel 5) Performance of anti-burn: PPT (UL94V-0) or anti-burn ABS (UL94V-0), combustibility of GB/T 5169.7-1985 standard 6) Construction features: adopts modularization design, elegant outlook and high endurance 7) Pulling-out force: tin bronze and silver plating (20 - 40uinch), pulling-out force not less than 25N 8) Intermediate resistance between reed terminators: no more than 7m (ohm between intermediate reeds under standard examination condition) 9) Intermediate resistance: no more than 3m ohm under standard examination condition 10) Performance impedance: 120Ω (balance) 11) Work rate: 2mb/s 12) Insulation resistance: 1,000mΩ / 500V (DC) 13) Resistance to voltage: no breakdown or arc for 1 minute under 1kV (DC) 14) Crosstalk ratio: ≥60dB (50kHz - 210MHz) 15) Plug-in loss: ≤0.4dB (50kHz - 210MHz) 16) Back wave loss: ≥18dB (50kHz - 210MHz) 17) Life: 200 cyclesFeatures: – Cable side up, jumper side down – Module body material: PC, fiberglass reinforced, halogen-free, UL 94 V-0 – Contact material: spring bronze, silver-plated contact surface – Grid size: 25 mmdisconnection module ANSHI Subscriber Terminal Block Double-side 3M module LSA connecting module PROTECTION UNIT MAGAZINEANSHI Disconnection module Subscriber Terminal Block ANSHI Connection module LSA connection module LSA Disconnection Module10 paris ANSHI Disconnection Double-side 3M module ANSHI Disconnection Double-side module