Аморфный сплав сердечника трансформатора

Product Overview Amorphous alloy core transformer is made of amorphous alloy core. The no load loss is reduced by about 75% compared with conventional transformer made of silicon steel, while no-load current is decreased by about 80%. This type of transformer is the ideal energy-saving distribution transformer with significant effect. It is especially suitable for rural power grid and developing regions where the load rate is less. Product Characteristic 1. Amorphous alloy core transformer is optimally designed by means of CAD. Its performance complies with IEC60076 and Chinese National Standards GB1094 and JB/T10318. 2. The amorphous alloy core materials are imported from the USA and Japan. 3. The oil tank is corrugated type and fabricated with automatic tank production line from GEORG, Germany. Pre-treatment liquid and coating powder on the surface are made by international top brand suppliers. The tank is degreasing, pickling, phosphating, electophoresis by automatic production line, then power spray coating and heat-solidity. The surface of transformer is corrosion resistance. 4. The winding is made of high strength varnished wire or paper-insulated wire, which offers uniform distributionof ampereturns, reasonable insulation structure so as to offer high ability to short-circuit withstanding capacity of winding. 5. The active part applies core free-hanging structure. The gasket is made of high quality acrylate rubber which can inhibit ageing caused by sun and heat. Applications This product has advantages of multi-function, reliable operation, easy for maintenance, highly integrated, fast installation, elegant features. It's very popular in construction sites, stations, docks, mining&oil industries, and other sites requiring temporary power supply.