Алюминиевый Проводной Стад-роуд

Aluminum Wired Road Stud --With both LED and reflector (combination of active and passive lightening). --Control distance : 500 meters. --Working temperature: -20°C +70°C 1. Body shell material: aluminum alloy. 2. LED: Φ5mm, 2pcs per side,>5000mcd. 3. Light intensity: 6000 mcd. 4. LED Color: white, red, yellow, green, or blue. 5. With 5 years life, 1 year warranty. Key Features: 1. Wired studs can flash at the same time which looks very tidy and pleasing. 2. Battery and circuit are placed into the control box instead of in road stud, in this case, wired studs can resist more pressure. Besides, battery and circuit can be replaced. All those above endue wired stud with long life. 3. Control distance of controller: no limit Technical features: 1) Used on the road surface: Road stud body: 1. Size: 105*105*21mm with 50mm anchor 2. Shell: aluminum alloy 3. Have both active lighting and reflective lighting. 4. Compression resistance: 16 tons 5. Water-proof: IP68 6. LED: 5mm,2pcs per side,>5000mcd 7. Frequency: 1Hz or at customer request. 8. Color: white, red, yellow, green, blue 9. Working temperature: -20+70 10. Viewing distance: >500 meters Control System: 1. Solar panel: 30W (for 70 pcs of wired stud) 2. Solar panel connected by universal wheel which can be at any direction. 3. Power storage: 24V 12AH lead-acid battery 4. Control distance: DIA 500 meters 5. Life:5 years 6. Painted metal board 7. Connection way: connected with post by back groove 8. Connecting lead: 1.5 pipe with 25mm PVC cover 9. Cutting depth: 3-4cm under the road surface, cutting width: 5-10mm 10. Position: edge line 11. Sealing glue: Bitumen 12. Water proof: IP65 Installation: 1. Installation position should be at the edge line or on the tunnel wall, shouldnt be in the center line of road. 2. Better use two-component epoxy glue Notice: 1. Try to avoid big impact on shipment. 2. After long-time in storage, the wired stud should be charged to work again.