Al-Mg-Mn сплава лист

Aluminum metal is widely used in the architecture to comfort , light , durable , economic , and environmental protection direction play an important role ,its features as following: Weight: Aluminum density 2.73g per meter,only the steel of 1/3 strength. Intensity: Through melting and heat treatment method and can achieve very high strength, even the construction of large aircraft structures. Corrosion resistance: Outdoor aluminum is durable and reliable construction materials ,it has a self-rust function of the surface in the natural environment can form a thin layer of dense oxide layer, to prevent Continue in the air oxidation of metal corrosion, but also has a variety of acid corrosion resistance ability. Surface finish and elegant appearance. Can be anodized, electrophoresis, chemical processing ,polishing ,paint handing. Easy production of metal forming. Can extrusion,stretching,rolling,punching,spinning,casting and forging.Aluminum can be rolled into a variety of thickness , or even very thin aluminum foil. Good conductivity :Non-magnetization and low electric spark sensitivity , can avoid electromagnetic interference and reduce the flammability under special circumstances. Links convenience. Aluminum can be riveting, welding(brazing and welding ,etc.),adhesives and other means to connect. Recyclable: High value of aluminum recycling, the cost of long-term use of more economical,in the conservation of natural resources has played a positive role. Products tolerance: thickness0.7,0.9,1.0mm+/-0.03mm(including coating thickness, except resistant film thickness)width≤500mm+/-1.5/-0mm501-1250mm+3.0/-0mm≥1250mm+4.0/-0mmlength≤1000mm+3.0/-0mm 1001-3000mm+4.0/-0mm 3001-5000mm+5.1/-0mm Aluminum plate and coating reference: test project reference standard aluminum plate: alloy chemical composition EN573-3 aluminum plate: mechanical properties EN1396 aluminum plate: tolerance EN1396,inner standard coating: chemical pretreatment of aluminum sheet ASTM D 5723 coating: coating thickness ECCA T1(ASTM D -1400) coating: glossiness ECCA T2(ASTM D -523) coating: color shade ECCA T3(ASTM D -2244) coating: pencil rigidity ECCA T4(ASTM D -3363) coating: anti-deforming capability ECCA T5(ASTM D -2794) coating: adhesion strength ECCA T6 coating: curved anti-crack performance(T curved) ECCA T7(ASTM D-4145) coating: used EK solvent to scrub(100 times) ECCA T11 coating: anti-salty spray(acid) ECCA T8(ASTM G-85) coating: anti-moist ASTM D 2247 coating: waterproof ECCA T9(ASTM D-870) coating: accelerate artificially anti-ageing test ECCA T10 coating: FLORIDA,ARIZONA from USA ASTM G-7 coating: HOOK,VAN,GELEEN from Netherlands ECCA T19 density(g/cm3) 2.73 expansion coefficient(mm/m/°C) 0.024 elastic modulus(N/mm2) 70000 The minimum requirement for the mechanical properties on the strength and extension of the aluminum alloy could refer to standard AA from American Aluminum Association and standard EN1396 from European.