активируется керамический шарик

(1) Product DescriptionActivated ceramic ball is a new support material for catalyst. It is processed by adding a small amount of transition metal oxide into the inert ceramic ball. It preserve the property of high-temperature resistance and strength of the inert ceramic ball, in addition, it has adequate catalytic activity when used in the process of olefin hydrogenation. If been set on the top of catalyst bed in the reactor, the activated ceramic ball can make the olefin in the secondary processing fraction pre-hydrogenated and, keep the catalyst from coking. Similarly, if been set on the bottom, it can remove the thio-alcohol caused in the reaction process. On the whole, using the activated ceramic ball can not only save the space in reactor ,but also protect the catalyst from poisoning or sintering and, consequently prolong the service life of catalyst. (2) Technical Specification Type Item(Ni-Mo) SW-1(Ni-W) SW-2(Co-Mo) SW-3Active componentNiO 0.5 - 1.0 MoO3 1.5 - 2.5NiO 0.5 - 1.0 WO3 1.5 - 2.5CoO 0.5 - 1.0 MoO3 1.5 - 2.5AppearanceYellowish brownFaint yellowLight greyPore volume,ml/g0.1-0.2Thermal resistance,C≥800Abrasion loss,%≤5 Crushing Strength N/grainΦ3-10≥150Φ13-20≥500Φ25-50≥1200Φ75≥3500Bulk density,kg/m31100-1300Note: The data of bulk density is given for reference only, not as the acceptance criterion. 3Catalytic Property TypeItemSW1SW2SW3Reaction temperature,C275300300320350300320350Hydrogen pressure,MPa3.03.03.03.03.03.03.03.0Liquid velocity, h-110104.24.24.24.24.24.2Ratio of hydrogen /oil600600450450450450450450Sulfur content, Wt %2.52.52.52.52.52.52.52.5Olefin content, Wt %27.527.527.527.527.527.527.527.5Rate of desulfation, %7695406077365463Olefin saturation,%589510334571942(4) SizeDiameter, Φ368101316202530385075Tolerance, mm±1.0±1.5±2.0±3.0(5) Product Standard Chemical Industry Standard HG/T3683.2-2000 Industrial Ceramic Ball Activated Ceramics ball