AD / DC / импульсный TIG Вт / я ММА и ПЛАЗМА СМЕНА сварщик (4

Feature:1, IGBT TECHNOLOGY 2, POWER SUPPLY: 1X230V,50/60HZ 3, INPUT POWER CAPACITY: 5KVA 4,NO LOAD VOLTAGE:60-80V 5, DC MMA: 1). BASE WELDING CURRENT RANGE: 5-160A 2). MAX. WELDING CURRENT: 160A, DUTY CYCLE: 35% 6, AC TIG: 1). NO -LOAD VOLTAGE:60-80V 2).BASE CURRENT ADJUSTABLE RANGE:20-200A 3). MAX. WELDING CURRENT:200A, DUTY CYCLE:35% 4), BALANCE ( SP:%):30-70% 5). AC WAVE FREQ: 20-100HZ 50-250HZ IS OPTIONED 7, DC TIG: 1). BASE CURRENT RANGE: 5-200A 2). MAX. OUTPUT CURRENT; 200A, DUTY CYCLE:35% 3). UP-SLOPE CURRENT TIME:0-10 SEC. 4). DOWN-SLOPE CURRENT TIME:0-10 SEC. 8. PULSE MODE: ON/OFF 1).PULSE CURRENT RANGE:5-200A 2).PULSE RATIO:0.1-0.9 3). PULSE FREQUENCY:0.5-25HZ 9. PRE-FLOW TIME:0.5 SEC. 10, AFTER FLOW TIME: 1-25SEC. 11. TIG ARCSTARTING MODE: HF ARC IGNITION 12. PLASMA CUTTING: 1), INPUT CURRENT: 30A 2), RATED OUTPUT CURRENT:40A, DUTY CYCLE:35% 3), CURRENT ADJUSTABLE RANGE:10-40A 4), NO-LOAD VOLTAGE:200-240V 5), ARC START MODE: HF IGNITION 6), CUTTING MODE: CONTACTING-CUT 7), AIR PRESSURE REQUIRED:0.2-0.4MPA 8), MAX. CUTTING THICKNESS: 12MM( MILD STEEL) 9), AFTER FOLW TIME:1-25S(Adjustable). 13. EFFICIENCY: >=88% 14,PROTECTION CLASS OF ENCLOSURE: IP21 15, NET WEIGHT: 25.00KGS 16. DIAMENTION:430×200×290MM 17. APPROVAL: ISO 9002, "CCC" 18. STANDARD ACCESSORIES: 1PC AIR COOLED TIG TORCH WP-26 W/I 4M CABLE, 1PC ELECTRODE HOLDER W/I 3M CABLE 1PC EARTH CLAMP W/I 3M CABLE 1PC 2M LONG INLET GAS HOSE, 1PC PLASMA TORCH PT-31 W/I 4.5 M CABLE 1PC AIR REDUCER WITH AIR PRESSURE GUAGE SOME CONSUMABLE PARTS OF TIG TORCH SOME CONSUMABLE PARTS OF PLASMA TORCH