ACP химической очистки линия

CJMHC1300/1600Pretreatmentproduct line plays a role in cleaning the surfaces ofthe aluminum rolls. After rolling, there are some impure dregs such as silicon,magnesium, iron and cuprum still stained on the surfaces of the aluminum rolls. This line carries on the chemical treatment on the surfaces to form capillaries by latest non-chromium medicament, so that the paint can be bonded tightly with the aluminum plates because of the perfect adsorbability. This line works in accordance with the regulations of national environmentprotection with no pollution occurred. CJMHC1300/1600 chemical Pre-treatment Product Line a) Type: Constant Chemical Pre-treatment Equipment b) Production speed Name of the production line: Pre-treatment line Maximum production speed 0-30 m/min Actual production speed 0-20 m/min c) Key material: MaterialAluminum roll (CJMHC1300/1600 Chemical)Thickness0.2-0.6mmWidthMaximum 1600mmWeightMaximum 3.5tonDiameterMaximum 1300mmDiameter of the core150,405mm Supporting Material: Names of Chemical disposalCLET560L degreaseACCT7482 Non-chrome ChemicalNotch thickness2-5%30-50%Unit dosage kg/m20.0080.0014 d) Weight of the aluminum reaction film: 40-120mg/m2 e) Heating method of the grease slot fluid: The temperature of the solutionThe highest temperature of the solution 60ºCType and temperature of the heaterHeated by electricity, the highest temperature is 100ºC f) Basic facilities: 8.1) Apparatus Main power: AC 380 V × 3 PHASE × 50Hz Operation power: AC 220 V × 1 PHASE × 50Hz ---A.V.R Voltage windage: ±10% Frequency scope: ±10% Capacity of total installation: 200KW 8.2) Pressure of the condensed air: 4-6 Kg/Cm2 8.3) Water pressure: 2-3 Kg/Cm2 Total water quantity: 2 ton/h g) Dimension: 23000L*4500W*2000H h) Total weight: 30 tons