60W Лазерная питания для РЕЗКИ

60W Laser Power Supply for Cutting Machine 1. Main Features: 1) Good compatibility: It can be applicable to 60W and 40W laser tubes. 2) Fast response speed and effect. 3) Dramatically lengthen the life of laser. 4) Easy Control: The start and stop of laser can be easily controlled by TTL level. And there are protection switch to test the external water, ventilation, etc. 5) Easy control of laser power: Both 0-5V analog signal and PWM signal can control the laser power. 6) The power supply has open circuit protection: Under the condition of good protective earthing, the power supply can work in open-circuit for a short time, which could avoid the damage of laser power supply because of the bursting of laser tube, thereby enhancing the life of power supply. 7) The power supply can take feedback interface which can be used in closed-loop control and testing the working current of laser. 8) The power supply adds a new function, that is timely scene judging which part is damaged, laser tube or laser power. (9)Application: Acrylic sculpture, cut; fabric sculpture, cut; Double-color plate engraving, cut; rubber sheet sculpture, cut, etc. 2. Specification: Input Input Voltage AC220V or AC110Vto be specified when placing order AC frequency 47440HZ Cold Surge Current ≤60A(AC220V Input) ≤30A(AC110 Input) Current Leakage ≤0.7MAAC220V Input ≤0.4MA(AC110V Input) Output Maximum Input Voltage DC 25KV Maximum Output Current DC 20MA Efficiency ≥90full load Mean Time Between Failure (MTBF) ≥1000H Response Speed ≤1msfrom the switch Signal is given to the output current up to 90% of the setting current Control Interface TTL level switch control; high or low effective level can be chosen (details refer to the control terminal specification) Withstand Voltage Input-Output, Input-Shell: AC1500V 10MA 60S; Output negative is connected with machine shell. Protection can work in open-circuit condition for a short timeRequire a good protective earthing and avoid arc between the positive and the machine shell Environment Operating Temperature-10 40,Relative Humidity (RH)≤90 Cooling Way Force-Air Cooling (FAC) Dimension L×W×H=167*144*97(mm)