60W импульсный источник питания (S-60-24)

S-60 seriessingle output switching power supplyCompetitivedprice and hige reliability105oC Output capacitorAC input power suitable for the worldHigh efficiency and low operation temperatureSoft-start current can reduce the AC input impact effeciticlyWith short-circui and overload protectionCompact size, ligh weight100% full-load burn-in testInstalled with EMI filter, minimum waveModelS-60-5 S-60-15S-60-15S-60-24DC output voltage5V12V15V24VOutput voltage rang(Note:2)±2%±1%±1%±1%Rated output current12A5A4A2.5AOutput current range0-12A0-5A0-4A0-2.5AWave and noise(Note:3)120mVp-p120mVp-p150mVp-p150mVp-pInlet stability(Note:4)±0.5%±0.5%±0.5%±0.5%Load stability(Note:5)±1%±0.5%±0.5%±0.5%DC output power60W60W60W40WEfficiency72%76%77%79%Adjustale range for DC voltage+10,-5%+10%+10%+10%Input current1.6A/115V 0.8A/230VAC Inrush currentCold-start current 30A/115V 60A/230VLeakage current<3.5mA/240VACOverload protection105% 150% Type: pulsing hiccup shutdown Reset: auto recoveryTemperature coefficient±0.03%/°c(0 50°c)Setup, rise, hold up time800ms, 50ms, 10ms/115V 300ms, 50ms, 80ms/230VACVibration10-500Hz, 2G 10min,/1cycle, Period for 60min, Each axesWithstand voltageInput and output internal 1.5KVAC, Input and enclosuer 1.5 KVAC, Output and enclosuer 0.5 KVACWorking temperature and humidity-10°c +60°c Refer to output derating curve, 20% 90% RHStore temperature and humidity-20°c +85°c, 10% 95%RHWeight0.5KgsSatety standardsUL 1012 TUV EN6050(IEC, UL 1950) ApprovedEMC standardsCISPR22(EN55022), IEC801-2,3,4 IEC555-2 VerficationNote: 1. The testing condition for the parameter above is: 230VAC input, rated load, 25°c 70% RH.Temperatuer. 2. Error: include the setting error, line stability and load stability.(Note:5). 3.Wave test: adopting "A12" double wire for 20 MHz, and 0.1 UF&47UF capacitor short-circuit for interrupting. 4. Inlet voltage stability test: wht is overload, the lowest voltage of inlet is up to the highest voltage. 5. Load stability test: The load is from 0% to 100%