5ZS (220) -23/20 высокого давления закачки воды насос

I.General description and its usage 5ZS (220)-23/20 High Pressure Water Injection Pump's driving end adopts the traditional connecting rod, while the pump's hydraulic end adopts the integral pump head structure with horizontal straight-through valve, It ensure the characteristics of simple structure, easy operation and maintenance, high pump efficiency, and long service life for the pump head at hydraulic end and the consumable parts. In addition, full automatic temperature controller is put up at the driving end, which ensures more safety and reliability of the water injecting pump. This pump is mostly suitable for high-pressure water injecting in oil fields and other non-particle fluid feeding. II. Technical parametersMedium Delivered Clean water and SewageMedium Temperature°C Normal TemperatureSuction Pressure MPa 0.05-0.5 Parameter Table DischargePressure(MPa) 20 DischargeCapacity(m3/h) 23 PlungerDiameter(mm) 50 StrokeLength(mm) 150 PumpSpeed(min-1) 280 PumpEfficiency(%) ≥85% Motor MotorPower(kW) 160 MotorSpeed(rpm) 990 MotorVoltage(V) 380V6KV10KV SuctionDiameter(mm) DN125(Φ140*7.5) DischargeDiameter(mm) DN65(Φ89*12) OverallDimensions(mm) 4050*2320*1480 WeightofPump(kg) 6900 LubricatingOilinCrankcase CCI5W/40 BeltType ZV25-6000 III. Structural Installation Figure of 5ZS (220)-23/20 High Pressure Water Injection Pump ItemDescription1Motor2Belt Guard Assembly3Power End Assembly4Fluid End Assembly5Pressure Regulator Assembly6Accumulator7Safety Relief Valve