500W один выход выключатель питания

SwitchpowerSP-500 series 1.Features: 1) High reliability, universal input 2) Built-in EMI filter 3) 100% full load burn-in test 4) Protection: Overload, short circuit, over voltage 5) PFC function: >98% 6) 1 year warranty 7) Dimensions: 185 x 120 x 92mm 8) CE certified 2. Specification: Model SpecificationSP-500-12SP-500-13.5SP-500-15SP-500-24SP-500-27SP-500-48DC output voltage12V13.5V15V24V27V48VOutput voltage error±1%±1%±1%±1%±1%±1%Rated output current40A36A32A20A18A10AOutput current rage0-40A0-36A0-32A0-20A0-18A0-10AWave and noise240mVp-p240mVp-p240mVp-p240mVp-p200mVp-p300mVp-pInlet stability±0.5%±0.5%±0.5%±0.5%±0.5%±0.5%Load stability(Note5)±1%±0.5%±0.5%±0.5%±0.5%±0.5%DC output power480W486W480W480W486W480WEfficiency84%84%83%85.5%86.5%87%Adjustable range for DC voltage10-13.2V12-15V13.5-18V20-26.4V24-30V41-56VAC input voltage range88132VAC/176264VAC BY SWITCH 4763Hz;124370VDCAC Input current7A/115V 3.5A/230VPower Factor0.95/100240VACAC impulse current18A/115V 36A/230VLeakage current<3.5mA/240VACOverload protection105%135% TypePULSING HICCUP SHUTDOWN Reset: auto recoveryOver-voltage protection13.816.2V15.518.2V1821V27.632.4V3136.5V57.667.2VFan control,O.T.P.RTH1 OR RTH2>=50 FAN ON,<=45 FAN OFF,>=70 Cut off outputTemperature coefficient±0.03%(050)Setup rise hold up time1.5s,50ms,20msVibration10500Hz,2G 10min./1cycle,Period for 60min,EACH AXESWithstand voltage Input and output interval3KVAC,Input and enclosure1.5KVAC Output and enclosure0.5KVACIsolation resistanceInput and output interval,Input and enclosure,Output and enclosure500VDC/100M OhmsWorking temperature and humidity-10+50,20%90%RHStore temperature and humidity-20+85,10%95%%RHOverall dimension185*20*93mmWeight1.8KgsSafety standardsUL1950,TUV EN60950EMC standardsIEC1000-42,3,4,5,6,8,11 IEC100-3-2Note:1.The testing condition for the parameter above is:230VAC input, rated load,25 70%Rh,Humidity 2.Error,include the setting error, line stability and load stability.(Note:5) 3.Wave test:adoptingA12double wire for 20MHz,and 0.1uF&uF capacitor short-circuit for interrupting 4.Inlet voltage stability test: when is over load, the lowest voltage of inlet is representative to the highest voltage. 5.Load stability test: The load is from 0% to 100%,others 60%. 6.C2311must be knocked down. 3.Outline dimension: 4.Certification: 5.Label: