5 в 1 комбо пресс-печать тепла machineHCM-20

5in 1combo heat press machine Parameter Voltage 110v 220V 380VPower Mug 0.35KW Plate 0.28KW Cap 0.35KW Flat 1KWTemperature Range 0-399°CTime Range 0-999sesWorking table size Mug Diameter 80-95mm Plate Diameter 95mm and 125mm Cap 80*145mm Flat 300*300mmPacking size 72*44*39cmWeight 41kg Features 1, Automatic and steady electronic digital temp display High accuracy 2, Individual circuit controller box. 3, Heating cylinder and heating board are integrated, safe and durable 4, Automatic time controller 5, Endure high temp silicon sheet,make the pressure more evenly ,can be turned up to 180degree 6, Convenient to adjust the pressure,the image can be transferred on the t-shirt , tie, mug, cap ,tiles plate and so on. 7, Heating accessory can be extended,small size,many functions Operation 1,Turn up handle bar,let the machine open. Put the materials which you want to do the transfer on the working table ,adjust the pressure (turn clockwise to add the pressure,turn anti-clockwise to reduce the pressure) 2,Open the machine,,prepare the materials.(To avoid burning out, Pls don’t put the materials on the working table when it is in the process of heating) 3,Connect the power line which comes with the machine,turn the power on ,the controller will check automatically ,the machines will work after 10secs,then you can set the time and temp ,(for the first time pls set the right time and temp,more details you can see the usage of the display of controller box.) 4,Set the temp and time,machine start heating up (then arrive at 200degree,it needs about 15minutes) 5,When the temp arrives at which what we set ,put the materials on the working table, then turn down the handle bar,and the time begins to count ,when the time’s up ,machine alarm ,turn up the handle bar, then finish it. 6,Noticed For safe, the power shall have the earth wire The function of the temp controller is complex,pls don’t press any button for other operation unless you set up the temp ,otherwise the process of the controller will be damaged !!! Attention 1, If the paper is cold peel, then you need to wait 15-20 sec and peel off paper. If it is hot peel, then you need to peel off paper at once after printing. (Had better peel paper in diagonal line) 2, Successful printing needs right time, temp and pressure. 3, you need to test printing to get right time and temp first 4, Mug heating mat and Plate heating mat when heating up, you need to put the mug/plate in it, or it will burn the mat 5, T-shirt heating board and cap heating mat need to wait temp reach you set,then you could start printing. 6, Please do not press other function for the controller, or it will damage it.