3D панель Сетка машина

Main Features of 3D Panel Wire Mesh Machine: 1.The Welding Machine welds the horizontal and vertical wires to form a steel wire mesh. Mesh Width: 1200mm, Grid size: 50 x 50mm or 50 x 100mm; 2. PLC control system to automatically straightens, welds and cuts the steel wire; 3. The A type machine has the mechanical transmission system; 4. The B type machine makes use of the integrated pneumatic system to ensure that the operation is stable, high reliability and long life span of the equipment. 5. The horizontal steel wires use the integrated straightening and cutting system to ensure stable operation and high accuracy; 6. The Automatic Alarm Device is easy to operate and maintenance; 7. Will automatically cut the steel wire mesh according the pre-set mesh length. Technical Data No. ltemsUnit/Type3DMW-3B3DMW-4B1Production CapacityM2/hr80702Welding IntensityNPull-off force foreach spot≥350Pull-off force foreach spot≥7003Mesh Longitudinal Errormm≤±0.2≤±0.24Welding Defect Rate%≤1≤15Steel Wire Diametermm2.0-3.02.0-4.06Power Supply380V, 50Hz, 60KVA380V, 50Hz, 75KVA7Max. Outer Dimensionmm15800x2780x150015800x2780x15008Machine Net Weightkg28003000 No. ltemsUnit/Type3D-MW-3B3D-MW-4B1Production CapacityM2/hr80702Welding IntensityNPull-off force foreach spot≥350Pull-off force foreach spot≥7003Mesh Longitudinal Errormm≤±0.2≤±0.24Welding Defect Rate%≤1≤15Steel Wire Diametermm2.0-3.02.0-4.06Power Supply380V, 50Hz, 60KVA380V, 50Hz, 75KVA7Max. Outer Dimensionmm15800x2780x150015800x2780x15008Machine Net Weightkg28003000