300x300 400x400 600x600 Полный плитки тела

Full body tiles Glazed porcelaintiles,Wall tiles, floor tiles. 1. This is the best tile for hotel, airport, Department stores, Residential buildings, big project etc. 2. Packing details: a) 400*400MM 10pcs/ctn, 30kg/ctn, 1.60Sqm/ctn; b) 300*600MM 8pcs/ctn, 30kg/ctn, 1.44Sqm/ctn; c) 600*600MM 4pcs/ctn, 30kg/ctn, 1.44Sqm/ctn; d) 800*800MM 3pcs/ctn, 50kg/ctn; 1.92Sqm/ctn; e)1000*1000MM 2pcs/ctn, 60kg/ctn; 2.00Sqm/ctn 3. Delivery Time: 15days 4. We have many different color and different design in this series. Please kindly check our website. 5. Our price is very competitive with very good quality; 6. We have CE, ISO9001, Soncap, SASO for most of our tiles. 7. It's available in polished, super glossy, matt finish, etc. 8. Below are theinspection report: Inspection ReportTest Basis on ISO13006Item No.: FULL BODYTest DescriptionTest MethodISO13006 BIaTest ResultLimitSurface (CM2) ss>410Length and Width The manufacturer shall choose the work size as follows: a) for modular tiles in order to allow a nominal joint width of between 2mm and 5mm1); b) for non-modular tiles so that the difference between the work size and the nominal size is not more than ±2%(max. ±5mm). The deviation, in percent, of the average size for each tile (2 or 4 sides) from the work size (W). ISO10545-2600±1.0600.1 600.4The deviation, in percent, of the average size for each tile (2 or 4 sides) from the average size of the 10 test specimens (20 to 40 sides).ISO10545-2±0.5%/Thicknessa) The thickness shall be specified by the manufacturer.ISO10545-2-/b) The deviation, in percent, of the average thickness of each tile from the work size thickness.±5%/Straightness of sides (facial sides) The maximum deviation from straightness, in percent, related to the corresponding work sizes. ISO10545-2±0.2%-0.03 +0.04%Rectangularity The maximum deviation from rectangularity, in percent, related to the corresponding work sizes. ISO10545-2±0.2%-0.02 +0.03%Surface flatness The maximum deviation from flatness, in percent:a) central curvature, related to diagonal calculated from the work sizes;ISO10545-2±0.2%-0.04 +0.04%b) edge curvature, related to the corresponding work sizes;±0.2%-0.04 +0.06%c) warpage, related to diagonal calculated from the work sizes.±0.2%-0.05 +0.04%Surface QualityISO10545-2A minimum of 95% of the tiles shall be free from visible defect that would impair the appearance of a major area of tilesConformedWater absorption Percent by massISO10545-3≤0.5% individual maximum 0.6%0.23% 0.16 0.30%Breaking strength, in Na) thickness ≥ 7.5mmISO10545-4Not less than 13001607.4N b) thickness < 7.5mmNot less than 700/Modulus of rupture, in N/mm2 Not applicable to tiles with breaking strength ≥ 3000 NISO10545-4Minimum 35 Individual minimum 3239.6MPa 38.0 43.6MPa