240W переключатель питания (S-240-24)

Competitivedprice and high reliability 105oC Output capacitor AC input power suitable for the world High efficiency and low operation temperature Soft-start current can reduce the AC input impact effeciticly With short-circuit and overload protection Compact size, light weight 100% full-load burn-in test Installed with EMI filter, minimum waveModelS-240-5S-240-7.5S-240-12S-240-15S-240-24S-240-30S-240-48DC output voltage5V7.5V12V15V24V30V48VOutput voltage range(Note:2)±2%±2%±1%±1%±1%±1%±1%Rated output current40A30A18A15A10A8A5AOutput current range0-40A0-30A0-18A0-15A0-10A0-8A0-5AWave and noise(Note:3)150mVp-p200mVp-p150mVp-p150mVp-p180mVp-p180mVp-p240mVp-pInlet stability(Note:4)±0.5%±0.5%±0.5%±0.5%±0.5%±0.5%±1%Load stability(Note:5)±1%±1%±0.5%±0.5%±0.5%±0.5%±1%DC output power200W225W216W225W240W240W240WEfficiency78%80%82%83%85%85%87%Adjustable range for DC voltage4.5 5.8V6 9V10 14V12 18V120 28V27 233V41 56VInput current5A/115V 2.5A/230VAC inrush current18A/115V 36A/230VLeakage current<3.5mA/240VACOverload protection105% 150% Type: pulsing hiccup shutdown Reset: auto recoveryOver-voltage protection6 7V9.4 10.9V14.4 16.8V18.5 21.5V31.2 36V34.5 40.5V57.6 67.2VHigh-temperature protectionERH3>=65 70°c Fan on, <=55 60 °cFan off,>=80 85°c, Cut off ouput(5 15V) (24 48V)Setup, rise , hold up time1ms,20ms, 20msVibration10 500Hz, 2G 10min,/1cycle, Period for 60min, Each axesWithstand voltageInput and output internal: 1.5KvAC, Input and enclosure:1.5KvAC, Output and enclosure:0.5KvACWorking temperature and humidity-10°c +60°c(Refer to output derating curve), 20% 90%RHWeight1.1KgsSafety standardsUL 1950, EN60950EMC standardsEN55022, EN55204, EN61000, IEC8012,3,4, IEC555-2Note: 1. The testing condition for the paramenter above is: 230VAC input, rated load, 25°c 70% RH. Temperatuer. 2. Error: include the setting error, line stability and load stability.(Note:5) 3. Wave test: adopting "A12" double wire for 20MHz, and 0.1UF&47UF capacitor short-circuit for interrupting. 4. Inlet woltage stability test: when is over load, the lowest voltage of inlet is up to the highest voltage. 5. Load stability test: The load is from 0% to 100%