2043 UF смолы

UF resin2043 Urea Formaldehyde Resin PowderUse Artificial fine wood, Particleboard, Plywood, Chipboard, laminated wood, Veneer, Characteristic UF-2043 is the thermosetting polymer. Wood adhesive bond strength is better than the strength of wood. It is two components. According to the users needs, appropriate to different curing agent to adjust the use and hardening of time. UF-2043 can be dissolved with water in advance to save time before sizing. This product has good adhesion, high water resistance, fast curing time, low thermal curing, mould proof, transportation and convenient storage of superior performance. Main Specifications: Appearancewhite or yellowish powderGranularityOver 95% passing 100 mesh standard sieveFree formaldehyde0.27-5%PH7.5 8.0Moisture Content≤2%Storage LifeStored in cool place with sealed package at room temperature(1)21°C 12 months(2)30°C 6 months Package Specification: Two-ply bags with an inner plastic bag and an outer fabric bag 25kg / bag Use methods 1. The powder ratio of powder: water is 1:1 by weight to fully dissolve in water, until no solid matter in the presence of liquid. The optimal water temperature is 20°C to 30°C. Then add flour and the hardeners (1.5% to 3% of the powder). The use of curing agent decided by the ambient temperature and the pot life. The modulation of the glue can immediately gelatinize.2. Curing agent should be added according to the pot life of the production process. If the production environment temperature is 30°C, the amount of curing agent is 2%of the resin powder. And it’s pot life is 4 hours3. In order to avoid waste, the mixed adhesive should be changed according to the temperature and pot life. It is suggested using an electric blender if the mixed adhesive is large.4. Manual adhesive glue can be used knives, glue brush; a large area of glue-coating can be used laminator. It should be noted whether the surface is flat and smooth or not before sizing adhesive. Single-faced coating adhesive volume in general is 150-160g/square.5. Do not change the Production process provisions of the original glue content and pre-press, hot press parameters. Note UF-2043 is moisture absorbent and quickly becomes knotted losing effect and fluidity. It is usually packed in moisture-proof bags. Bags with remaining powders should be resealed after use. Storage This product is sealed in the original packaging, and stored in a comfortable temperature, dry place, do not put in direct sunlight or wet places. Safety precautions According to the basic operation of the chemical products, the powder can be safe use. Should work under conditions of good ventilation and avoid inhalation of dust or direct contact with the skin. Before meals and after operation, clean with soap and water. If the powder accidentally splashed into eyes, flush with water use, if necessary, seek medical advice. The suggestions given in these notes are based on data gained from experiments and experience. However, since operating conditions in the user’s plant is beyond our control, we cannot assure responsibility for any risks or liabilities, which may result from the use of our products.