2011One компонентов формальдегид мочевины смолы порошок

urea formaldehyde resin powerUF-2011 series/ One Component UF Resin PowderApplicant 1. The use of gluing wooden furniture ; 2. The use of gluing the lamimated board ,artificial board;3.The use of woodworking (joint wood &funiture);4. The use of layers boarder & veneer surface ;Product Characteristic:1. Convenient to use :after add water ,it can easy dissolve 2. Quick solidify, high glue intensity.3. Reach ideal effect both in cold and hot solidify.4. Strong heat-proof function 5. Free formaldehyde content meet the international standard.6. Color similar with the wood naturecolorTechnologyAppearanceBrown ,yellow or white powderWater Content≤2%Solid Contentover 97%Free formaldehyde 0.1-1%Solidify Time at room temperature8hUsual Cut Strengthen (After Pressure 20h)15MpaWater Shear Strengthen (After soak 24h)>11MPaStorage Time (10/20/30 °C )18/12/6 monthsWood preparation The wood to be bonded must be of uniform thinckness and the surface must be free from oil ,fat ,dust or other deposits (Thickness deviation <0.1mm)Glue mix 1) Mixture Rate: Weight: 2 portion powder to 1 portion waterVolumn: 4 portion powder to 1 portion water2) Dissolved Method a. Put the powder into a clean container. Add 2/3 water and blend it until all have been dissolved.b. Add the surplus and mix it about 2 to 5 minutes. c. The usage time of proper liquor should about 2 hours (Room Temperature)Glue spread The glue-spread rate is dependent on the surface of the adherents .Normal glue spread is 200-300 g/m2 .On very smooth surface(e.g medium density fibreboard ,MDF) or in foil laminating ,lower glue spread may be used .On the other hand ,e.g on rough veneer surfact ,more glue must be applied .Pressure (on normal temperature)Woodconifer woodenbroad-leaved woodenTemperature5-25°C >25°C5-25°C >25°CGelatinizing quantities(two sides)g/m2200-250 250-300200-250 250-300Pressurization (MPa) 0.8-1.0 0.8- 1.01.2-1.5 1.2- 1.5 Pressurization time(h)>8 >7 >8 >8Maintenance:Normally the maintenance time is 8-12 hours , but in winter it must be maintained more than 12 hours over 20°C.Heat press3-7 mins at the 100°CPackaging 2-ply bags with inner plastic bag and outer fabric bag25kg/bagNote This power is easy to be damped; it will concert into pieces rapidly after damped, lose use and liquidity,Normally it require damp-proof packaging. Tie up fast to seal the bag when it is inexhaustibility.