1300 Электронная фортепиано ключ шлифовальный станок

Name;Piano Key Sanding Machine Model: S1300R-TSE Standarded configuration: the operation width is all controlled by computer , the width can set up by yourself , high accuracy and steability . the feed inlet is equipped with 44 check point devices, which is from Omron (Japan ) .44 piano key units is controlled by 44 accurate cylinder elements which is imported .the swing of the sand belt is controlled by cylinder,make sure the swing is steady and even . which can keep the device from the dust and out of the power .the machine is equipped with multi-loop trouble display device .the electronic coder (Japan ,Omron ) cooperates with the computer , the coder can record the speed of feed automatically , and make both the front rollerand the piano key board shift with the material automatically . the coder helps to solve the problem of missing the initial and ending of material .the handing plate and the pressing roller are made of casting iron ,minimizes the noise and maximized the stability .The main power moter is started on the model of triangle automaticlythe conveyor table is adopted trapezoidal lead screw , high accuracy , little noise . 10. the sanding belt is adopted automatical blowing device , length the life of the sand elt ,raisethe quality of the sanding plate . 11. the bears are imported from Japan NSK , the electronic pneumatic elements is from France . 12. the electronic device is controlled by PC device ,which is from French Schneider and Japan Omron . 13. the whole big frame is made of steel , welding and pressing . 14. the conveyor table is vacuum table , it can make the small or smooth works more accutate . 15. the piano key sand belt can used both sides according to the surface of the normal plate and the paint plate . Technical data : Operation width : 1300mm Material thickness :3-110mm Min operation length :480mm The speed of first sand belt:controlled by inverter The speed of second sand belt :controlled by inverter The size of sand belt : 1330*2620mm The speed of feeding :5-20m/min The power of conveyor motor :4kw General motor power :24.94kw Working pressure :0.4-0.8Mpa Consumption volume of compressed air : 18m3/h Dust-absorption capacity: 9000 m3/h Machine size: 2750*2150*2200mm Weight 3600kg