10KV Открытый Теплоусаживающ Прекращение

Product Introduction: 10KV outdoor heat shrinkable terminations are designed for 1 and 3-core XLPE power cables. The whole set contains heat shrinkable insulation tubes,stress control tubes,breakouts, sealing tubes, phase color tubes, voil filler, shed and 3-hole shed.Its unique patented water-proof design ensures the higher security of cable accessories. Its high permittivity material endows it unique stress control system. And with compact design and few components, this product is easy to install, minimal waste for disposal. Fast, consistent installation means lower installing costs. Installation environment: use of torch adds flexibility to cable preparation in any climate. It also has high reliability. Heat-activated seals ensure maximum protection against moisture ingress. Lightweight construction requires no additional support. UV resistant, non-tracking outer tube for long life, even under adverse conditions. It also has excellent mechanical robustness. Characteristics: 1.Operating Temperature:-40 degree - 110 degree; 2.Shrink Temperature:90 degree; 3.Waterproof, RoHS compliant. Technical Data: PROPERTYTEST CONDITION AND TEQUIREMENTRESULTSAC withstand for 1 min.(wet withstand, for outdoor termination)No breakdown and flashover shall occur at 45kV, 1minNo breakdown and flashover occurred on the combi.sample at 45kV, 1minPartial discharge13kV, ≤20PC13kV, ≤20PCLoad cycleHeating for 5h, cooling for 3h. Conductor's temperature is 95, 3 cyclesConductor's temperature is 95. Results refer to the following testImpulse voltage withstand 1.2/50us±10times10 positiVe and 10 negative impulses at 105kV, flashover 1 time is allowed but not including total testing timesNo breakdown of the combi.sample occurred at 105kVDC voltage withstand negative 15 min.No breakdown and flashover shall occur at 52kVNo breakdown and flashover occurred on the combi.sample at 52kV, 15minAC voltage withstand, 4hNo breakdown and flashover shall occur at 35kV, 4hNo breakdown and flashover occurred on the combi.sample at 35kV, 4hOil-seal up testHeating for 24h, cooling for 24h. Conductor's temperature is 65, oil pressure: 100MPANo leaking, no seeping(Only for Paper insulated cables)