100W 500W-зарядное устройство с CE, UL ROHS GS

Battery Charger I. Introduction MC45 Battery charger on the battery to achieve good, high-current fast charging. MC45 battery charger has a secure connection to the battery. With a load of rechargeable batteries is an additional feature. Second, the scope of application 1, MC45 can be customized as follows: lead-acid batteries (water, sealed maintenance-free, gel), polymer lithium battery, lithium iron phosphate batteries, Ni-MH / cadmium batteries; 2, including general home, solar power systems, safety control systems, uninterruptible power systems (UPS), electric wheelchairs, electric vehicles, ships, etc. running on battery power of the place or redundant systems; 3, Features 1, aluminum alloy enclosure, surface spray treatment, original handle design; 2, Four-charging step, the whole intelligence of the batteries: Fast charge, maintenance charge, floating charge Chong Chongdian and other methods; 3, original pre-charge model to place a long time unused batteries, and depth of discharge the battery and extend battery life with the repair function; 4, the charger can be plugged into the battery; 5, three different charging status LED direct and counter-polarity protection; 6, wide range of input voltage; 7, can be installed "active power factor correction" Active PFC functions in order to comply with EU EN61000-3-2 harmonic current requirements to meet the world's attention to the norms of a gradual trend; 8,84% high efficiency; 9, light weight, small size; 10, output short circuit, overload, overvoltage, over temperature, reverse polarity protection, full-featured protection; 11, charger and battery protection: 12, transformer high-voltage isolation protection; 13, 2 brushless cooling fan, automatic detection of charge current control cooling fan speed; 14, the international standard input plug (IEC320-C14); 15, Safety Certification: CE / RoHS / KC / UL / cUL / GS / CB; 16, with an emergency ON / OFF switch; 4, charging mode: 1, in the pre-charge stage: a small battery pulse charging, the battery voltage to reach the normal values, automatically switch to constant current charging phase, (if not serve this function, reporting directly to the battery depth of discharge will be a one-time loss of high-current charging the battery! ) 2, in the constant current charging stages: maximum current fast charge constant-current mode until the battery voltage trace increased, automatically switch to the constant pressure phase; 3, in the constant voltage charging phase: In order to maintain this voltage value, at this time reduced to the minimum charge current automatically switches to float Chong Chongdian stage; 4, in the floating Chong Chongdian stage: When the battery is well charged, the charger switch to from time to time to maintain floating Chong Chongdian model. In this mode, the charger can compensate for battery self-discharge losses. Note: The lithium battery charging curve is slightly different in detail, see specifications. 5, technical parameters Output Voltage 12V 24V 36V 48V 60V 72V Output Current 30A 16A 12A 8A 6A 5A Recommended battery capacity 100-200Ah 60-150Ah 50-100Ah 40-80Ah 30-50Ah 20-40Ah Note: the above lead-acid battery charging voltage, lithium batteries (lithium-iron battery) rechargeable battery string according to the number of parameters are different. See detailed specifications. 2, Input Voltage: 80 132Vac, or 176 264Vac 50/60Hz 3, size (L * W * H): 270 * 100 * 90mm 4, Weight: approximately equal to 1.50KG 5 Indicators: Power, charge, full, anti-polarity protection of instructions; 6, the output plugs (optional): goods suffix plug, alligator clip, XLR head, high-current connectors. 7, input plug: national plug custom;