waste plastic refining oil equipment

Main features of latest series of devices (take HT-T-1 for example) 1. Dispose the waste rubber tires comprehensive to produce two products---carbon black and tire oil at the same time 2. Each set of device is comprised of ten parts. 2.1. Pre-treatment device for raw materials 2.2. Rapid feeder 2.3. Integrated rotary cracking device 2.4. Automatic slanging system with characteristics of safety and environmental protection 2.5. Whirlwind degusting device with oil steam 2.6. Rapid condensation system 2.7. Exhaust purification, recycle and combustion system 2.8. Heat source supply system 2.9. Environmental protection and exhaust system for heat source 2.10. Central electric control system 3. Domestic Initiation: 3.1 Manufacturing the whole set of device should be carried out in an environment of no smoking and no smell, thus the device having excellent safety and environmental protection property. 3.2 The matching pressure release device is capable of increasing the value added of oil product to a large degree through deeply processing the oil product. 3.3 the design on the split theater for the key device gets over completely such disadvantageous factors as uneven partial heating in the bottom of current domestic upright split theater with flat base, and easy cracking and low output as well as short service life, etc. And the principal machine has the horizontal 360°C rotational structure and the rotation speed is 0.4 turn per minute. 3.4 This device has rapid and applied feeding and tapping system, and the maximum feeding capacity of the WJ-9 type reaches to 20 tons per 24 hours. 3.5 High effective fuel gas heating system: when the temperature of the heated gas reaches to 150°C, a large amount of gases----methane to butane---that cannot be fluidities in common temperature and pressure will be generated. And these gases can generate a large amount of energy after being burned fully in our specially designed gas burner, thus saving energy to a large degree. 3.6 the latest technology developed by the Scientific Research Center for New Energy Sources can be used for this device so as to be able to produce without any pulsation. 3.7 The latest technology and the whole split and oil product collecting system developed by the Scientific Research Center for New Energy Sources can be used for this device, and the produced fuel oil has some advantages such as high quality and high oil output rate.