RCA jack

RCA jack

Wenzhou, China
Production capacity:
50000 Piece / Day
Wenzhou, China
Beginner
0086-577-62397333
Cecilia Liang
Contact person

Basic Information

Place of Origin Zhejiang China (Mainland)
Brand Name SJ
Model Number AV-12B
Type RCA
Gender Female
RCA jack(AUDIO VIDEO JACK,AV PIN JACK) 1.1.1Insulation resistance Insulation resistance of between mutually insulated terminals or metals parts shall not be less than 100 megohms before test or initial,using a 500 volts DC insulation resistance meter. 1.2 Contact resistance Contact resistance of between terminals of the jack to be made a closed circuit shall not exceed 80 milliohms after life test ,at a current of below 1 KHZ by voltage drop method or four terminals methods. 2.2.1.Terminal strength Every terminal shall be capable of withstand a force of 5N for 10 seconds without lossing and breakdown,but deformation of terminal is accepted. 2.2.Life test The life test shall consist of 500 cycles of insertion and extraction with gauge plug covered with a thin coat of grease in order to prevent from heating and wearing,at a rate of 20 to 30 cycles per minutes under no load.At the conclusion of teh test,the jack shall be in operating condition. 2.3.Humidity test The jack shall be subjected to temperature of 40±2 °Cand relative humidity of 90% to 95% for a period of 96 hours.Upon completion of exposure,dew drops shall be blown out and removed from the jack,after which the jack shall conditioned at room ambient conditions for 30 minutes. At the conclusion of the test ,the jackshall be comply with paragraphs 2.1 and 2.2. 2.4.Cold test The jack shall be subjected to temperature of -25±2 C for a period of 96 hours,then shall be allowed to remain in room ambient conditions for 30 minutes.At the conclusion of the test,the jack shall be comply with paragraph 2.1 and 2.2. 2.5.Resistance to soldering heat test The jack terminal shall be dipped in solder under the condition as specified below. Temperature of solder:260 ±5C Dip time:5±1 seconds. At the conclusion of the test ,the jack shall be comply with paragraphs 2.1 and 2.2,and not show remarkable failure. 2.6.Temperature cycling test. The jack shall subjected to 12 cycles of the following conditions shoen in the figure,and then shall returned and allowed to remain in room ambient condition for 30 minutes.

Delivery terms and packaging

Packaging Detail: The measurement ofevery CTNS like:39*31*39. Delivery Detail: 10-15days after the prepayment
Port: NINGBO\SHANGHAI

Payment term

Telegraphic transfer

Фотографии

    Password recovery
    To recover your password, please enter in the box below your email address with which you have registered:
    The password reset code has been sent to your Email.
    Код уже был отправлен Вам ранее.
    Вы можете ввести его в поле выше, или получить новый код через сек.
    An error has occurred. Please check your e-mail address and try again.
    Ваш новый пароль:

    Name is empty


    Выберите страну доставки

    You have not written a message

    By clicking on the "Send" button, you agree that your data will be used to process your request. Further information and revocation instructions can be found in the data protection declaration.

    Your message has been sent!

    Close

    1
    Рынок B2B
    Cancel Close
      Show more close
        Area search
        Worldwide
        Категории
          Product