MEAN WELL 1500W,24VDC SE-1500-24 Switching power s

MODEL SE-1500-24OUTPUTDCVOLTAGE 24V RATEDCURRENT 62.5A CURRENTRANGE 0 62.5A RATEDPOWER 1500W RIPPLE & NOISE (max.) Note.2 150MVP-P VOLTAGEADJ.RANGE 21.6 26.4V VOLTAGE TOLERANCE Note.3 ±1.0% LINEREGULATION ±0.5% LOADREGULATION ±0.5% SETUP.RISEHOLD.TIME 150ms, 12ms / 230VAC at full load HOLD TIME(TYP.) 26ms / 230VAC at full load INPUTVOLTAGERANGE 180 264VAC 254 370VDC FREQUENCYRANGE 47 63HZ EFFICIENCY (Typ.) 87% AC CURRENT (Typ.) 17.5A / 230VAC INRUSH CURRENT (Typ.) 60A / 230VAC LEAKAGECURRENT <3.5mA/240VAC PROTECTIONOVERLOAD 105 125%rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed OVER TEMPERATURE 95 ±5 (5V), 85± 5 (12V,15V), 80 ±5 (24V), 75 ±5 (27V,48V) (TSW1) detect on heatsink of o/p diode Protection type: shut down o?p voltage recovers automatically after temperature goes down OVER VOLTAGE 27.6 32.4V Protection typeShut odown o/p voltage,re-power on to recover FUNCTIONDC_OK SIGNAL PSU turn on:3.3V 5.6V PUS turn off:0 1V REMOTE CONTROL RC+/RC-: 0 0.8V power on; 4 10V power off ENVIRONMENTWORKING TEMP -20 +70 (Refer to output load derating curve) WORKINGHUMIDITY 20 90% RH non-condensing STORAGE TEMP HUMIDITY -40 +85 10 95%RH TEMPCOEFFICIENT ±0.05%(0 50) VIBRATION 10 500HZ,2G10min/1cycle,60 min each alongX,Y,Zaxes SAFETY&EMCSAFETY STANDARDS UL60950-1 Approved WITHSTAND VOLTAGE 1/P-0/P:3KVAC 1/P-FG:1.5KVAC 0/P-FG:0.5KVAC ISOLATIONRESISTANCE 1/P-0/P,1/P-FG,0/P-FG:100M Ohms/500VDC QTHERSMTBF 134.5Khrs min MIL-HDBK-217F(25) DIMENSION 278*177.8*63.5mm(L*W*H) PACKING 3.3Kg; 4pcs14.2Kg/1.14CUFT NOTE1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.3. Tolerance : includes set up tolerance, line regulation and load regulation.