Fixed Body Belt Feeder

XDG Belt Feeder The purpose and characteristics XDG Belt Feeder is based on the combined K-type reciprocating feeder and form the structural characteristics of the R & D of new products.The product can be widely used in coal, building materials, chemicals, light industry, electricity, food and other industries to overcome the old series of feeder noise, life is short, the shortcomings can not work long hours.K-type reciprocating feeder Since its introduction in 1958, because of its rugged, durable work, anti-corrosion resistance, overall strength, the design and use of a large number of units usedThe use of K-type reciprocating feeder structure design of XDG belt feeder, a good solution to replace the old and new equipment commonly encountered during the interface design of general-purpose platforms, and installation of exchange problemsXDG Belt Feeder with the main features. The fixed body, the use of bolted connections and the connection speed removable tank, simple structure, easy accessibility, low labor intensity, the operating time is short.Set the fixed part of the tape in the body easy to adjust belt tensioning device elongation.The whole machine used roller, uniform sizes, can be interchangeable. Continuously variable drive gear position, adjust the convenient, safe and reliable, interchangeable.The drive pulley outer layer of plastic packages, the friction coefficient, transfer efficiency.Feeder optional flameproof electrical equipment can be used with coal dust and gas in the mine.All models have anti-deviation feeder devices, and can be equipped with electrical gates according to the design.The technical specifications Model Throughput (t/h) Belt width (mm) Transfer roller diameter. (mm) Roller diameter (mm) Main motor power (kw) Flange interface XDG800 800 800 320 159 7.5 the same as K3 XDG1000 1000 1000 320 159 7.5 the same as K4 XDG3000 3000 1000 320 159 11.5 the same as K4 XDG4000 4000 1200 320 159 the same as K5 XDG5000 5000 1400 320 159 the same as K5 XDG6000 5800 1400 320 159 the same as K5 Type tagFlange interface can be customized according to customer requirements, does not affect the ability to transport feed.Work Principle.Belt Feeder and the general based on the same conveyor belt as a continuous rotation of traction load transport equipment sector, which, compared with ordinary adhesive tape machine, an increase of tape thickness, which extended the principle can be adjusted by the length of tape When the tension screw to the tail end of the move, the tape is up tight, start the motor, the power transmission through the reducer to the drive pulley, belt driven rotating drum, roller support tape, so that a smooth drive, the tape is flexible , can absorb the impact of coal material. Material flow through the positions in the tape, tape rotation was taken by the tail, to uninstall.Structural Overview.Belt feeder is divided into four parts, the fixed part of the warehouse by the port connected to the feeding mechanism of K-type reciprocating interfaces formed can reach the base support surface, the middle feeder trough, the material in which movement, the gate to prevent materials spills, service gate, blocking positions in the time to repair, to prevent obscene material All connections are made of high strength bolt, so that the removal, replacement, repair, moving convenience