Crusher

CNBM,the largest state-owned building Materials Company in China, which belongs to ChinaState Council.CNBM is: Total assets of30Billion US Dollars12 National first Class Research and design institute6 National Technology Center and Laboratory8 Provincial and Industrial Technology Center8 Standards and Technology Committee30 national and industrial quality inspection, test and certification center CNBM Jaw Crusher lWorking Principle The motor drives pulley, making the movable Jaw do periodic movement through eccentric shaft. The angle between toggle plate and movable jaw increases when the movable jaw moves up. So the movable jaw closes to the fixed jaw. The stone is crushed in this process. ModelFeed Opening Size (mm)Max. Feed Size (mm)Capacity t/h Weight (t)Overall Dimension (L*W*H) (mm)Motor Power (KW)PE-150*250150*2501251-30.6720*660*8505.5PE-200*300200*3001802-61910*750*9907.5PE-200*350200*3501803-101.31000*870*99011PE-250*400250*4002105-202.81300*1090*127015PE-400*600400*60034016-6071730*1730*163030PE-500*750500*75042540-110121980*2080*187055PE-600*900600*90050060-200202290*2290*240075PE-750*1060750*1060630115-330292660*2430*2800110PE-870*1060870*1060660290-33631.52810*2430*2800110PE-900*1060900*1060685160-400332870*2420*2940110PE-900*1200900*1200750220-450523380*2870*3330110PE-1000*12001000*1200850315-500553480*2876*3330110PE-1200*15001200*15001020400-800100.94200*3300*3500160 CNBM Impact Crusher lWorking Principle When the impact crusher works, the motor drives the rotor rotate at a high speed, on the rotor where the blow bar installed. When the materials goes into the area which the blow bar effects, under the impact function of the below bar at a high speed, the materials are thrown to the impact device above the rotor continuously. And then the materials are rebounded from the impact liner to the area where the blow bar effects for being crushed again. The materials from large to small all to be crushed in the impact chamber repeatedly. The process won’t stop until the materials are crushed to the required size and then discharged from outlet. ModelSpecification (mm)Feed Size (mm)Capacity (t/h)Power (Kw)Weight (t)Dimension (L*W*H) (mm)PF-1007Φ1000*700400*73030-7045122330*1660*2300PF-1010Φ1000*1050400*108050-9055152370*1700*2390PF-1210Φ1250*1050400*108070-13011017.72680*2160*2800PF-1214Φ1250*1400400*1430100-18013222.42650*2460*2800PF-1315Φ1320*1500860*1520130-250220273180*2720*2620 CNBM Cone Crusher Working parts of spring cone crusher is suitable to crush various kinds of ores and rocks of medium or above medium hardness. The spring release system of crusher acts as an overloading protection system that allows metals to pass through the crushing chamber but not damage the crusher. The release system uses dry oil and water as two kinds of sealed formation to make plaster powder and engine oil separated to make sure reliable performance. The type of crushing chamber depends upon the size of feeding and fineness of the crushed product. ModelMax.Input (mm) Capacity (t/h) Motor Power (Kw)Weight (t) Dimension (L*w*H)(mm) PYB 90011550-905510.23050*1640*2350PYZ 9006020-6510.2PYD 9004015-5010.3PYB 1200145110-20011024.74152*2300*2980PYZ 120010050-15025PYD 12005018-10525.6PYB 1750215280-48016050.34870*3800*4192PYZ 1750185115-32050.3PYD 17508575-23050.4PYB 2200300590-1000260-280807705*3430*4852PYZ 2200230200-58080PYD 2200100120-34081.4