CQ1210LT-2 12v 10A classical solar charge controll

For household Controller Main characteristics: 1.From 12V/5A to48V/10A 2. Control power: from several watt to several hundreds watt 3. Voltage level: 12V,24V,48V 4. Solar modules 1 groups input control. 5. Controlled by MCU microprocessor, Can meet any special demands on different occasions, it also can avoid surging due to start and shut domn simultaneously of any groups. 6. Has a series of alarm and protective functions such as over-charge,over-discharge,over-load,short-circuit,reverse-connect,reverse-prevent at night and over-heat. 7. Display battery capacity: LED show 8. Can be grounded with anode or cathode based on the demand of controlller. 9. Has temperature compensation functions. 10. Holl current and voltage sensor. 11. Thunder-defend: according to demand of system, can be installed thunder-defend equippments of different levels. 1.From 12V/5A to48V/10A 2. Control power: from several watt to several hundreds kilowatt 3. Voltage level: 12V,24V,48V 4. Solar modules 2 groups input control. 5. Controlled by MCU microprocessor, Can meet any special demands on different occasions, it also can avoid surging due to start and shut domn simultaneously of any groups. 6. Has a series of alarm and protective functions such as over-charge,over-discharge,over-load,short-circuit,reverse-connect,reverse-prevent at night and over-heat. 7. Display battery capacity and set time: LED show 8. Can be grounded with anode or cathode based on the demand of controlller. 9. Has temperature compensation functions. 10. Holl current and voltage sensor. 11. Thunder-defend: according to demand of system, can be installed thunder-defend equippments of different levels.12.Automatic turn on by the PV panel voltage, can set the time freely from four minutes to fifteen hours .13.can be ste light turn on ---time turn off ---time turn on –light turn off