AST-CRS-300 Common Rail Pump Tester

Common Rail Injector Tester Specifications: CRI-200 test bench is the special device to test the performance of high-pressure common rail injector assembly, it is installed the BOSCH common rail pump to provide 0 2000 bar of rail pressure, it can test injectors of main producers: BOSCH, SIEMENS, DELPHI and DENSO. >>>Common Rail Injector Tester CHARACTERISTIC:1. Main motor drive adopts the frequency change to adjust the speed.2. It is installedBOSCH common rail pump to provide 0 2000 bar ofrail pressure.3. The drive signal percentage can be controlled.4. Protection function of short-circuit. 5. The rail pressure can be tested in real time; it contains thehigh-pressure protection function.6. Pulse and frequency of the injector drive signal can be adjusted.7. The injection time can be set. >>>Common Rail Injector Tester FUNCTIONS:1. Test the max. Oil quantity of high-pressure common rail injector.2. Test the cranking oil quantity of high-pressure common railinjector.3. Test the backflow oil quantity of high-pressure common railinjector.4. Test the average oil quantity of high-pressure common railinjector.5. Set the high-pressure common rail injector' injection state and oil quantity measure.>>>Common Rail Injector Tester Technical Parameter1. Test frequency of injector: 50-3000rpm;2. Pulse width: 0.1-200ms;3. Test injection time: 1-300s;4. Rail pressure: 0-200mpa;5. Graduate: 120ML;6. Input power: AC 380V/50HZ/3Phase or 220V/60HZ/3Phase or on request;7. Fuel temperature: 40°C;8. Overall dimension: 1200MM×800MM×1600MM;9. Weight: 400KG.