Anti-pilling & Bio Polish Enzyme(textile auxil

Anti-pilling & Bio Polish Enzyme FA-PM500FA-PM500 is a newest cellulase product with excellent polishing effect. Suitable for cotton, linen and Tencel fabrics, gives them very neat surface. Properties pH 4.0 4.5 Physical form amber liquid Composition acid cellulase Characteristic Small dosage and short processing time can achieve the desired effect of surface modification.For cotton, linen and Tencel fabrics, it can give them a lasting polishing effect.Applications Desizing Thoroughly desizing is needed in order to ensure stable finishing effect. Our high temperature and low temperature desizing enzymes can be used to remove starch, starch derivatives or starch mixed with synthetic sizes. Chemical Agents Non-ionic surfactants can be used together with enzymes for increasing the activity of enzyme. However, the compatibility between enzymes and surfactants should be checked before application. ParameterOptimum conditionUsable RangeTemperature50-55°C45-65°CpH value4.5-5.54.0-6.0Liquid Ratio1:8 1:151:3 1:20Process TimeAccording to the fabrics20-60 mins Recommend Dosage There are many factors can impact polish effect, including the texture and structure of fabrics, technological parameters, auxiliaries, dyes, process time, equipments and expected effect. Fabric TypeDosage of enzyme(o.w.f)Heavy fabrics0.5 1.5%Light weight fabrics0.2 1% Enzyme inactivation All cellulase should be inactivated after treatment. Residual enzyme will decrease strength of the fabrics than expected. The method of inactivation is as follows: Adjust pH value above to 9.0, temperature above to 60°C and keep for 15 minutes. And you can use soda ash or borax to adjust the pH value. Storage The activity of enzymes will gradually reduce when storage after a certain time. And the loss of activity mainly depends on the storage temperature. It is recommended that keep enzymes in a cold storage. Enzyme activity could stable for 3 months when stored at 25°C in a closed container. Long-term storage or other hazardous conditions, including high temperature, may lead to more dosage. Safety and considerations Avoid inhalation of enzyme liquid, if inadvertently contact with skin or eyes, rinse immediately with water continuously at least 15 minutes.