35W Single output switching power supply(S-35-24)

S-35 series single output switch power supplyCompetitivedprice and high reliability105 Output capacitorAC input power suitable for the worldHigh efficiency and low operation temperatureSoft-start current can reduce the AC input impact effciticlyWith short-circuit and overload protectionCompact size, light weight100% full-load burn-in testInstalled with EMI filter, minimum waveModelS-35-5S-35-12S-35-15S-35-24DC output voltage5V12V15V24VOutput voltage rang(Note:2)±2%±1%±1%±1%Rated output current7A3A2.4A1.5AOutput current range0-7A0-3A0-2.40-1.5AWave and noise(Note:3)75mVp-p100mVp-p101mVp-p100mVp-pInlet stability(Note:4)±0.5%±0.5%±0.5%±0.5%Load stability(Note:5)±1%±0.5%±0.5%±0.5%DC output power35W36W36W36WEfficiency70%76%78%78%Adjustale range for DC voltage+10,-5%+10%+10%+10%Input current0.5A/115V 0.25A/230VAC Inrush currentCold-start current 15A/115V 30A/230VLeakage current<0.5mA/240VACOverload protection105% 150% Type: pulsing hiccup shutdown Reset: auto recoveryTemperature coefficient±0.03%/°c(0 50°c)Setup, rise, hold up time200ms, 100ms, 30msVibration10-500Hz, 2G 10min,/1cycle, Period for 60min, Each axesWithstand voltageInput and output internal 1.5KVAC, Input and enclosuer 1.5 KVAC, Output and enclosuer 0.5 KVACWorking temperature and humidity-10°c +60°c (Refer to output derating curve) 20% 90% RHStore temperature and humidity-20°c +85°c, 10% 95%RHWeight0.4KgsSatety standardsMeet UL 1012 requirement(Not apply for the mark)EMC standardsMeet FCC aprt 15 J Conduction class BNote: 1. The testing condition for the parameter above is: 230VAC input, rated load, 25oC 70%RH.Temperature. 2. Error. include the setting error, line stability and load stability. (Note:5) 3. Wave test: adopting "A12" double wire for 20MHz, and 0.1UF&47UF capacitor short-circuit for interrupting. 4. Inlet voltage stability test: when is over load, the lowest voltage of inlet is up to the highest voltage. 5. Load stability test: The load is from 0% to 100%. 6. Total output canbe maximum Current, total load can not exceed the maximum output power.