145W single output switching power (S-145-12)

S-145 seriessingle output switching powerCompetitivedprice and high reliability 105oC Output capacitor AC input power suitable for the world High efficiency and low operation temperature Soft-start current can reduce the AC input impact effeciticly With short-circuit and overload protection Compact size, light weight 100% full-load burn-in test Installed with EMI filter, minimum waveModelS-145-5S-145-7.5S-145-12S-145-24DC output voltage5V7.5V12V24VOutput voltage range(Note:2)±2%±1%±1%±1%Rated output current25A18A12A6AOutput current range0-25A0-18A0-12A0-6AWave and noise(Note:3)100mV100mV100mV100mVInlet stability(Note:4)±0.5%±0.5%±0.3%±0.2%Load stability(Note:5)±0.5%±4%±1%±0.2%DC output power125W135W144W144WEfficiency78%80.5%80.5%0.84Adjustable range for DC voltage4.75 5.5V6 8V10.8 03.2V21 28VInput current3.2A/115V1.6A/230VAC inrush currentCold-start current 35A/115V 60A/230VLeakage current<1mA/240VACOverload protection125% 165% Type: pulsing hiccup shutdown Reset: quto recoverySetup, rise , hold up time100ms, 50ms, 20msVibration10 500Hz, 2G 10min,/1cycle, Period for 60min, Each axesWithstand voltageInput and output internal: 1.5KvAC, Input and enclosure:1.5KvAC, Output and enclosure:0.5KvACWorking temperature and humidity-10°c +60°c(Refer to output derating curve), 20% 90%RHStore temperature and humidity-20°c 85°c, 10% 95%RHWeight0.7KgsSafety standardsMeet UL 1950 requirment (Not apply for the mark)EMC standardsMeet FCC PART 15 J Conduction class BNote: 1. The testing condition for the paramenter above is: 230VAC input, rated load, 25 70% RH. Temperatuer. 2. Error: include the setting error, line stability and load stability.(Note:5) 3. Wave test: adopting "A12" double wire for 20MHz, and 0.1UF&47UF capacitor short-circuit for interrupting. 4. Inlet woltage stability test: when is over load, the lowest voltage of inlet is up to the highest voltage. 5. Load stability test: The load is from 0% to 100%