120W SMPS(S-120-12)

S-120 series SMPSCompetitivedprice and high reliability 105oC Output capacitorAC input power suitable for the world High efficiency and low operation temperature Soft-start current can reduce the AC input impact effeciticly With short-circuit and overload protection Compact size, light weight 100% full-load burn-in test Installed with EMI filter, minimum waveModelS-120-3S-120-5S-120-7.5S-120-12S-120-15S-120-24S-120-27S-120-48DC output voltage3V5V7.5V125V15V24V27V48VOutput voltage range(Note:2)±2%±2%±1%±1%±1%±1%±1%±1%Rated output current22A24A16A10A8A5A4.4A2.5AOutput current range0-22A0-24A0-16A0-10A0-8A0-5A0-4.4A0-2AWave and noise(Note:3)100mV100mV100mV100mV100mV100mV100mV100mVInlet stability(Note:4)±0.5%±0.5%±0.5%±0.5%±0.5%±0.5%±0.5%±0.5%Load stability(Note:5)±0.5%±1%±0.5%±0.3%±0.3%±0.2%±0.3%±0.2%DC output power66W120W120W120W120W120W119W120WEfficiency70%78%80%81%81%84%84%84%Adjustable range for DC voltage2.85 3V4.75 5.5V6.75 8.25V10.8 13.2V13.5 16.5V21.6 26.4V26 32V43.2 52.8VInput current2.4A/115V 1.2A/230VAC inrush currentCold-start current 30A/115V 60A/230VLeakage current<1mA/240VACOverload protection105% 150%150% 200%105% 150% Type: Output shutdown Reset: Recycle AC ON/OFFTemperature coefficient±0.03%/°c(0 50°c)Setup, rise , hold up time200ms,100ms, 30msVibration10 500Hz, 2G 10min,/1cycle, Period for 60min, Each axesWithstand voltageInput and output internal: 1.5KvAC, Input and enclosure:1.5KvAC, Output and enclosure:0.5KvACWorking temperature and humidity-10°c +60°c(Refer to output derating curve), 20% 90%RHWeight0.66KgsSafety standardsMeet UL 1012 requirementNot apply forr the markEMC standardsMeet FCC PART 15 J Conduction class BNote: 1. The testing condition for the paramenter above is: 230VAC input, rated load, 25°c 70% RH. Temperatuer. 2. Error: include the setting error, line stability and load stability.(Note:5) 3. Wave test: adopting "A12" double wire for 20MHz, and 0.1UF&47UF capacitor short-circuit for interrupting. 4. Inlet woltage stability test: when is over load, the lowest voltage of inlet is up to the highest voltage. 5. Load stability test: The load is from 0% to 100%