100W Single output switching power supply (S-100 s

Low price and high reliability 105oC Output capacitor AC input power suitable for the world High efficiency and low operation temperature Soft-start current can reduce the AC input impact effeciticly With short-circuit and overload protection Compact size, light weight 100% full-load burn-in test Installed with EMI filter, minimum waveModelS-100-5 S-100-12S-100-15S-100-24DC output voltage5 V12V15V24VOutput voltage range(Note:2)±2%±1%±1%±1%Rated output current20A8.5A6.7A4.5AOutput current range0-20A0-8.5A0-6.7A0-4.5AWave and noise(Note:3)100mVp-p100mVp-p100mVp-p100mVp-pInlet stability(Note:4)±0.5%±0.3%±0.3%±0.2%Load stability(Note:5)±0.5%±0.3%±0.3%±0.2%DC output power100W102W100.5W108WEfficiency78%81%81%84%Adjustable range for DC voltage4.75 5.5V10.8 13.2V13.5 16.5V21.6 26.4VAC input voltage range85 264VAC 47 63Hz;Input current2.4A/115V1.2A/230VAC inrush currentCold-start current 30A/115V 60A/230VLeakage current<1mA/240VACOverload protection105% 150% Type: pulsing hiccup shutdown Reset: tuto recoveryTemperature coefficient±0.03%/°c(0 50°c)Setup, rise , hold up time200ms, 100ms, 30msVibration10 500Hz, 2G 10min,/1cycle, Period for 60min, Each axesWithstand voltageInput and output internal: Input and encolsur: 1.5KvAC, Output and enclosure: 0.5KvACIsolation resistanceInput and output internal: Input and enclosure, Output and enclosure:500VDC/100MΩWorking temperature and humidity-10°c +60°c(Refer to output derating curve), 20% 90%RHOverall dimension199×98×38mmWeight0.65KgsSafety standardsMeet UL 1012 requiement (Not apply for the mark)EMC standardsMeet FCC PART 15 J Conduction class BNote: 1. The testing condition for the paramenter above is: 230VAC input, rated load, 25°c 70% RH. Temperatuer. 2. Error: include the setting error, line stability and load stability.(Note:5) 3. Wave test: adopting "A12" double wire for 20MHz, and 0.1UF&47UF capacitor short-circuit for interrupting. 4. Inler woltage stability test: when is over load, the lowest voltage of inlet is up to the highest voltage. 5. Load stability test: The load is from 0% to 100%