Wetterschutz Silikon-Dichtstoff

High-grade Weatherproof Silicone Sealant Characteristics: 1. One component, neutral room temperature curing, oxime type, excellent adhesion property for most building materials. 2. Form a superior durable, flexible silicone rubber seal after cured, withstand continuing repeated tensile and compression, keep excellent performance between the temperature of -50oC +100oC. 3. Long use life, virtually unaffected by sunlight, snow, rain, ozone. Ideal material of weatherability. 4.Excellent unprimed adhesion to a wide variety of construction materials. 5. Ease of application, Non-corrosive and low odor. 6. Specifically designed for general glazing and weatherproof sealing in curtain-wall. Major uses: 1. Weatherproof filling and sealing of various kinds of glass curtain-wall and other substrate curtain-walls. 2. Filling and sealing of indoor and outdoor decoration engineering. 3. Many other building and industrial uses. Limitation:1. The product is not used as structural sealant.2. Not suitable for frost-laden or wet surfaces.3. Not for permanent or continuous water immersion4. Not suitable for confined joint(the sealant need atmospheric moisture for cure)5. Do not use on materials that bleed grease, plasticizer or solvent, such as the surface of wood permeated-oil.6. For better performance, not use when the substrate surface temperature below 4oC or exceed 40oC. How to use: Please consult the Kamyip Technical Manual. All the information should not be used in substitution for customers test to ensure that Kamyip products are safe, effective and fully satisfactory for the intended end use. Storage and usable life: It belong to Non-inflammable and non-explosive goods, as general non-dangerous goods to transport. When stored in a cool, ventilated, dry and the temperature at or below 27oC, it has a usable life of 9 months from the date of manufacture. Packaging: 1. Cartridge: 280ml 300ml 24 cartridges per carton 2. Soft sausage: 500ml 590ml 20 sausages per carton Testing Standard: JC/T882 No.:ItemThe StandardTest ResultIndividual Assessment1AppearanceFine,smooth,homogeneous paste;No bubbles,crust and agglomerations Pass the standardPassable2Droop Degree(mm) Uprightness≤30PassableLevel No distortionNo distortionPassable3Extrusion ability, (ml/min)≥8085.1Passable4Tack Free Time, (h)≤30.6Passable5Tensile modulus (Mpa)23oC 0.4 or0.60.7Passable-20oC/Passable6Definite ElongationNo breakNo breakPassable