Teflon Wendeplatte

teflon turning plate Product Characteristics: Polytetrafluoroethylene turning belt, film is made of polytetrafluoroethylene moulding press roughcast turning processing. It has good dielectric, non-aging and the best anti corrosion properties andwide application range. The film can be divided into non direct, semi-direct and direct film. It has good characteristic of high tensile strength, good insulativity and non stickiness. Use: Used for all kinds of medium operating pad seal, lubricate material and electric insulativity under all kinds of coefficient such as capacitor medium, lead insulativity, appliance meter insulativity. PTFE Turning Belt Common Type and Specification (Unit: mm) can also be produced according to customers requirements. Item SpecificationTurning BeltThickness 0.54Width 100500Length≥1000Main Technical Index Item UnitIndexProportion Intensityg/cm32.102.30Tensile Strength ≥MPa≥15.0Elongation at Break ≥%150Voltage Withstand ≥KV/mm10 PTFE film (directive, semi-directive, non directive) Type and Specification (Unit:mm) Name ThicknessWidthPTFE Film0.051.05300Main Technical Index Item UnitSFM-1SFM-2SFM-3DirectiveSemi-directiveNon DirectiveNon DirectiveNon DirectiveTensile StrengthMPa≥30≥20≥10≥30≥10Elongation at Break%≥30≥60≥100≥30≥1001MHZ Dielectric Constant1.8-2.2//1.82.2/Direct Breakdown Voltage Strength (Normal Temperature)KV/mmAverage200100406030Minimum40104//Specificationsstandard or according to customers requirements. Packing: Wooden cases or according to customers requirements. Remark: We can produce products of Chinese Standard, ANSI, DIN, and JIS or process of non-standard.