soda siphon

Instruction for using: 1. Fill the siphon with cold water into the bottle. 80% of the permissible quantity indicated on the bottle is suggested. 2. Insert the ascending tube with the seal into the bottle through the holding tube. Make sure that the seal is correctly fitted on the ascending tube. 3.Place the siphon head and screw down until the threading on the bottle is no longer visible. 4.Insert the gold-colored CO2 charger holder into the charger holder. For guaranteed quality use original soda chargers. 5. Screw the charger with the charger holder into the siphon head until you hear the gas hissing out. Unscrew the charge along with the charger holder and place the protective cap onto the threading. Shaking the bottle vigorousely. 6.To obtain soda water, press the lever down gently. Direct the jet of water at the inside wall of the glsss. Before unscrewing the siphon head, press down the lever until no more water or gas comes out.