Silicon Controlled Galvanik Stromversorgung

KD series silicon controlled rectifier features: 1) According to technical requirements, you may select between the working conditions of automatic constant voltage and stationary stream on standing current density 2) Preset soft start: 0 - 180sec 3) High accuracy digit display of ampere-hour integrating instrument (called as multifunctional controller of electricity or intelligent direct current ampere-hour (minute) meter) may be added according to different requirements from customers (must illustrate in orders) 4) Reliable protective functions for over current, short circuit and over temperature conditions 5) High efficiency, energy save, long life, reliable performance 6) Three-phase five-wire rectifier transformer and six-phase or twelve-phase non-balance resistor 7) Save at least 10% of energy 8) Attached remote unit or attached central control system to control several sets of rectifiers at the same time (must illustrate in orders) 9) Usage: electroplating, electrophoretic coating, electrolysis, aluminum alloy oxidize, rare earth smelting, protection of anticorrosive positive electrode of chemical equipment, accumulator charging KD series silicon controlled rectifier specifications: 1) Output current: DC 10 - 50,000A 2) Output voltage: DC 0 -12, 18, 24, 36V, optional selection SKD series periodic reversing silicon controlled electroplating power supply features: 1) Three working conditions available: auto-reversing direction, positive direction and reversing direction 2) Automatically replace the polar of outputting current 3) Increase quality of electroplating layers for compactness, hardness and brightness 4) Automatic timing function to help control quality of thickness, hardness and wearability 5) Huge current value in split second available 6) Various protection functions for automatic constant voltage and current limit, constant current, over current, short circuit, voltage limiting and lack of phase 7) Attached remote controller for long-distance or central controlling 8) Main transformer has been immersed in vacuum and has been dried to guarantee safe coefficient and reliability 9) Soft start function to avoid the current destroying when it starts in split second 10) Usage: suitable for chromium plating, especially for hard chromium plating SKD series periodic reversing silicon controlled electroplating power supply specifications: 1) Output current: DC 100 - 50,000A 2) Output voltage: DC 0 -12, 18, 24V, optional selection 1)with the support of intelligent dual-control standby technology,the switching between the main and auxiliary control system can be activated free when under failure. 2)with 12-phase full-wave rectification,the harmonic and ripple factor become lower. 3)adopt large-size touch screen for display and control,and humanization operation interface used for cataphoresis process. 4)available to record various process parameters so that the use and saving become easier. 5)with RS-485 communication interface,the network deployment becomes easier. 6)print function available. 7)air cooled,oil cooled,water cooled,oil soaking water cooled.