selbstklebende Vinyl

Description:Car Vinyl QT301BG is an opaque Polymeric vinyl with AIR-FREE technology. It also features a long-term durability for 3-5 years and a highly cohesive acrylic pressure-sensitive adhesive that is protected with a high quality siliconized liner. AIR-FREE technology allows trapped air to be released during application. AIR-FREE is a kind of particular technology that utilizes embossing patterns on the release liner, making it easier to remove trapped bubbles and increasing overall efficiency and productivity.Advantages: Outstanding dimensional stability (Shrinkage rate less than 1%) Excellent printing performance Excellent lay flatness even in humid conditions Excellent weather resistance: Solvent-based acrylic adhesive Release liner: 98# Super flat, Double-side, olefin-coated Paper Available Width: 0.914m, 106m, 1.27m, 1.37m, 1.52mApplications: Solvent inkjet printing: Vutek, Arizona, Mimaki, Mutoh, Roland, Seiko, HP, etc. Outdoor displays, signs, exhibition stands, and vehicle wrap The film conforms well to flat and seamed surfaces when processed and applied according to ORIENTFLEXs recommendations.Compatible Product: Car Vinyl QT301BG ------ Polymeric vinyl Film.All information given concerning ORIENTFLEX Car Vinyl is based upon our practical experience. The research is believed to be accurate, but does not constitute a warranty or guarantee. Due to the wide variety of applications, the customer should independently verify the suitability of the material for the specific application.Vinyl films should only be applied to properly cleaned surfaces. Any painted or treated surface should be allowed to thoroughly cure before applying any vinyl film. Some vinyl films may be incompatible with some paints and lacquers; therefore, the customer should independently test the product before the actual application.Physical Properties:ItemDescriptionFilm0.08mm opaque film with glossy finishThickness0.10mm with adhesive (± 10 %)AdhesiveAcrylic, pressure-sensitive (Solvent-based)Adhesive colorGray or BlackLinerDouble-side, olefin-coated paper / Kraft PaperApplication surfacesFlat or compound/curved surfaces, rivetsApplication temp.³ 50°F (65°F to 77°F optimum)Durability:Long-term outdoor durability for 3-5 years when properly processed and applied (unprinted film, vertical exposure). Durability is based upon field experience and exposure tests believed to be accurate.Shelf Life:Shelf life is 1 year from factory shipment.Storage condition: Free from excessive moisture, temperature, & direct sunlight (68°F x 50% R.H)Physical Properties:PropertyMetric UnitsTest MethodThickness (Including adhesive)0.10mm (± 10 %)MicrometerTensile strength³ 21.3 lbs/in²ASTM 882Elongation³ 100%ASTM 882Peel adhesion(24hrs)2.65 lbs/in180 peeling PSTC-1Service temp. range-13°F 179°FFilm applied Al panels 24hrs prior to testApplication temp.³ 50°F65°F to 77°F optimum, on clean substrateself adhesive vinyl