SDB Geschwindigkeit durchschnittlich Rohrströmungsmesser mit niedrigen Kosten und

Sic-de-ba (briefly named SDB), speed-average-pipe flowmeter, which has measure component---speed average pipe. It is the new measure component developed based on Pitot measure principle. SDB work with differential pressure transmitter, they can measure the gas, liquid and steam in round pipe or rectangle pipe. Compared with other flowmeters, SDB has features as stable, good repeatability, easy install, less pressure loss and cost little, simple structure and so on. It is particularly used in energy, environment protection filed. So, SDB has used in power supply, metallurgy, petroleum, chemical, light industry, coal and municipal field. Product feature (1) Widely applied to measuring medium. It can use for one-way flow, single-phase gas, steam and liquid which density less than 10 centipoises. (2) Simple structure, without any active component. Since there is no flow in the probe, so it can has long life and good stability. (3) With several group of pressure hole, probe tests the average flowrate and its pressure differential which can accurately display the actual flowrate in the pipe. (4)SDB flowmeter has simple structure. The detector size is independent with pipe diameter, so it has low installing cost. Compared with orifice plates, the installing cost can be 60% lower. (5) SDB has lower operation cost, compared with orifice plates. SDB adoptes non-contracting throttle set, with low pressure lose. Its pressure lose only 3% 5% of orifice plate. So 90% operation cost can be reduced. It is a high-efficient and energy-saving flow sensor. (6) Wide flow range, above 10:1. It can adapts wide variable working condition. (7)SDB-HS can be installed without stopping production. That will avoid economic lose. (8) Long stability and good repeatability. type SDB speed-average-pipe flowmeteraccuracy ±1%Repeatability ±0.1%working pressure 0 40MPa(0.6 MPa 1.0 MPa 1.6 MPa 2.5 MPa 4.0 MPa and above)Medium temperature -180°C 550°Cmeasure upper-limited depend on strength of probe lower-limited Depend on minimum pressure difference.Material SUS316L, alloy steel, or special requirementrange ratio above 10:1Pipe 40mm 9,000mm round pipe,square pipeMedium one-way flow, single-phase gas, steam and liquid which density less than 10 centipoises. Flow rate requirement gas≥4.5m/s liquid≥0.6 m/s steam≥9.7m/s