Schutzschalter

:circuit breaker 1:Application The zero phase current transformer of earth leakage protection switch is used for examining the current vector difference value which flows through the zero-phase current transformer meanwhile a relative output power produced on the secondary winding of zero-phase current transformer is added to the earth leakage trip,when earth leakage of hazard occurs in the protected circuits only leakage current of electric hazard current reaches or exceeeds or exceeds leakage operating current,the earth leakage trip may operate and make the switch to break the fault circuit thus the protection for hazard is realized.Residual current circuit breaker standards of GB16916.1-2003.IEC1008ETC. 2:Use and maintenance I:Ambient air temperature ambient air temperature ranges from -10°C 40°C not exceeding 35°C averagely in 24hours. II:Location installation location can not exceed 2000 meters above sea level. III:Magnetic field outside the installation please can not exceed 5 times of the site of terrestrial magnetism in all direction. 3:Main Technical Specifications Standard GB16916,BS EN61008Rated voltage(Un) 2Pole:230V AC;4Pole:400V ACRated current(In) 25,40,63ARated residual operating current(In) 30,100,300,500MARated residual non-operating current(Ino) 0.5InResidual current off-time ≤0.1sMinimum value of rated making and breaking capacity(Im) 500ARated conditional short-circuit current(Inc) 3KAInstallation On symmetrical DIN rail 4:Ordering Information I:Product Type II:Current products III:Products Voltage IIII:Number of products V:If you have other requirements please specify