pneumatische Steckanschlüsse

1. Using the hose should first try to cut flat and plug into the button at the bottom, and then click the trachea in order to maintain even the Wangwai La Access Success: unloading pipe as depressed button, while pulling the tube along the axial direction. 2. Different manufacturers who have taken a different thread of internal standards, in use, outside the PT or NPT thread types, even if coated with sealant, please make full use of Teflon tape to prevent leakage. 3. Work with the button on the centerline of the trachea no more than 30 degrees, otherwise the choice of PL45, and other models. 4. (I). Material: Brass/Plastic (Ii).Connecting thread: BSP, BSPP, NPT, PT (C).Connecting pipe diameter: 3,4,6,8,10,12 (OD) ((Iv). Medium: compressed air and low pressure liquid (for use in other media, please contact the company with the (V).Working temperature: 5 60 (Vi).Working Pressure: 0 0.8Mpa 4. It is the Brass/Plastic pneumatic fitting. And we also can supply many other types, please make sure which you want to buy. We hope to have cooperations with you. If you can send me the drawing of fittings. We also can design and make the products.