marine Hydraulikwinde

This marine hydraulic windlassmostly driven by hydraulic pressure, hydraulic pump provide motives for the system, promote the hydraulic motor running, pass to the pinion gear which installed on motors axle end, pinion gear promote bull gear to slow running. The bull gear connect with principal axis, principal axis running promote gypsy wheel through hand-operated proportional valve to control hydraulic motors positive and reverse rotation, speed-up and speed-down, accomplish the work of drop and weigh anchor. Its one side equipped with a windlass drum,which is used to roll mooringrope, when ship mooring, through a clutch to accomplish the combine with principal axis, promote the windlass drum running, accomplish the moorin gropes veer and haul action.I ts one side equipped with a warpingbarrel, increase greater convenience for ship to moor and dock. Its base is composed of high-strength steel plates welded together,turn parts bearing use the copper of high quality. The installmethod of shiphull is connect with bolt, installation convenience. Its has sound structure,high quality making,low price,simple operation,suitable for all kinds of small and medium-sized ship to moor and dock. Technical specifications a. Achoring Part Dia of Chain 34mm(AM2) Working load: 49kN Rated speed: 12m/min Overload pull: 73.7kN Holding load: 294kN Quan of wheel: 1 b. Drums Part Working load: 40kN Rated speed: 15m/min Dia of rope: φ60mm Capacity for the rope: 190m(6 Layers) Quan of drum: 1 c .Warping part Warping pull: 30kN d. Hydraulic motor part Type IHM31-2500 Discharge 2500ml/min Rated pressure 20MPa Pressure in fact 12MPa Pressure in over load 18MPa e. Hydraulic system part Type of el-motor Y225-4-H×2 (IP44,F ) Power17.5kW Rotating speed1420r/min Working dutyS1 Pumps type Q63YCY14-1B×2 Valve CSBF-G25 Set pressure 22MPa Rated flowing 80L/min Oil boxs cubage 320L