hochwertigen Glasfiberstab für Isolator

high quality fiberglass rod for insulator 1.free sample provided 2.DCI brand 3.fiberglass rod for insulator 4.certificated by ISO9001 IEC etc Product introduction:Vacuum injection fiberglass rod and pulling lath are made through alkali-free and twist-free glass yarn soaking in epoxy polyester compound glue,and passing the vacuum injection,continuous pulling and pressing,and being solidified.They have good electrical performance and mechanical strength and better high temperature-resistant and stress corrosion-resistant properties.They can be processed according to different requirement:notch,turning,and wiring ect.Specifications of epoxy fiberglass rod diameter range from Φ8mm to Φ130mm,new models can be produced in accordance with user's demandTechnial requirement:1.The usual lengths of fiber glass rod are 2000,4000 and 6000mm.While they can be made at any length at options with a tolerance no more than ±5mm2.Apperance:No bonding wire at the surface,no internal cracks and scars.the color unevenness on the surface and small amount of accumulated gum is allowable.3.The fiberglass rod shall bare the machinery processing like sawing,driling,milling and lathing.1.certificated by IEC ANSI GB ISO9001 2.We can design and produce according to the drawings. 3 we supply insulators with reliable quality reasonable price and good service. We attend 2007 Hannover exhibition, India electricity 2008 exhibition,2008 Hannover exhibition,2009 and 2010 Dubai Middle East electricity exhibition