FRP-Panel

FRP Flat sheet: •Product: ACPP-Senbert anti-corrosion sheet •Coating: Surface is filmed Melinex 301 film •Resin: 323/HC197-HST103 resin •Fiber Glass: At less 22% fiberglass on the sheet and it is adopted MC good quality series fiberglass •Thickness: 1.5mm 2.0mm 2.5mm, tolerance ≤10% •Weight: 2800g/m2 3800g/m2 4700g/m2 •Standard Colors: Light Blue and Milky White •Operating Temperature: between -50 degree to+130degree •Warranty Period: 25 years •Profile: Roof using TD820,TD840,V125,TD760, Wall using V900, V840,V860 ect, other profiles are available upon requests. FRP Flat sheets: 1.Good tenacity. No cracking phenomenon when driving nails in roof installation 2.Having close combining with color steel plate. Cross- section thickness is uniform. The shape of FRP is consistent with steel plate. 3.Transmittance loss rate is low. No yellowing phenomenon after long term service. 4 Thermal expansion coefficient is close to that of steel plate. No cracking and water leakage in nail driving place because of expand with heat and contract with cold. 5.Light through FRP assumes scattering shape and gentle. 6.Bright and clean appearance, no distinct air bubble and cracking on FRP. 7.Long service life for more than 20 years Application areas: Industrial : Warehousing sheds, site cabins, security cabins, shelters, canteens Domestic : Parking sheds, room extensions, toilets, bathrooms, roofing Transportation : Bus station, ticket counters, parcel offices, shelters Agriculture: Farm house, poultry farms,generator rooms, sheds