Drei Chamber Sand, der Maschine

ImpactBreaker Three Chamber Sand Making Machine can crush granite, basalt, bluestone, etc. the diameters of which are from 100mm to 500mm, and its crushing compression strength is not more than 320Mp. Its features: big reduction ratio, high crushing efficiency, and convenient maintenance. The final product is desirable device for aggregation used in highway and railway surface and water and electricity industry. Three Chamber Sand Making Machine 1.Connected with locking sleeve assembly 2.Final product with cubical shape. 3.The blow bar with high chrome. 4.Easy maintenance. Hydraulic or hand opening. 5.Reliable operation. Impact plate with a special shape. Three Chamber Sand Making MachineThis impact crusher materials with impact force. When the materials enter the blow bar area, they are crushed due to the high-speed impact of the blow bar and are thrown to the impact plates on the rotor for secondary crush. Then the materials will be shot back to the blow bar again for the third crush. This process repeats until the materials are crushed to the required size and discharged from the lower part of the machine. The size and shape of the finished powder can be changed by adjusting the gap between the impact rack and rotor support. The machine employs self-weigh security device in its back frame. When other objects enter the impact cavity, they will be forced out of the machine by the impact rack in the front and back of the machine. Model Size of rotor (mm) Feed opening (mm) Max. feed size (mm) Handling capacity (t/h) Power of motor (kw) Weight (t) PF1010 Φ1000×1050 400×1080 350 50-80 75 12 PF1210 Φ1250×1050 400×1080 350 70-130 110 14 PF1214 Φ1250×1400 400×1430 350 90-180 132 18 PF1315 Φ1320×1500 860×1520 500 120-250 200 19 PF1320 Φ1320×2000 860×2030 500 160-350 260 24 Notice: Any change of Impact Crusher technical data shall not be advised additionally